FiltersClear
CMS-CATEGORY_REF
Content Source
Products
 
 
Search Results
CMS-XML Cleaning of imageCLASS Products
For the purpose of helping to sanitize your Canon imageCLASS product, it is recommended that you clean parts touched with the hands such as control panels, covers and jam locations with isopropyl alcohol using the following precautions:
CMS-XML Canon Toner Cartridge Limited Warranty
To obtain the shipping address of Canon U.S.A, Inc. or Canon Canada, Inc., please call the Canon U.S.A., Inc. Help Desk at 1-800-828-4040 or Canon Canada Technical Support at 1-800-OK- CANON . Shipping charges, if any, must be prepaid.
CMS-XML Print Media Requirements-PC 940
Print Media Requirements Paper Size Cassette: Letter, Legal, Legal-statement Bypass: Legal (8 1/2" x 14") - business card (2" x 3 1/2") Paper Weight Cassette: 17 lb to 20 lb (64 g/m2 to 80 g/m2
CMS-XML Steam Is Emitted from the Printer Output Area (imageCLASS and Faxphone)
To help paper avoid moisture or dryness, keep paper in its wrapper until it is ready to be used.
CMS-XML General Specifications - PC 940
Specifications Copy Sizes Legal (8 1/2" x 14") to business card (2" x 3 1/2") Non-Image Area 1/16" (2mm) at leading edge, left and right side Warm-up Time
CMS-XML Enlarging/Reducing Using the Zoom Key-PC 940
Enlarging/Reducing Using the Zoom Key The Copy quantity/Copy ratio display will display the copy quantity three seconds after you have finished setting the copy ratio and stopped pressing the <+> or <-> keys. To set the copy ratio to 120% for example, keep pressing the <+> key until 120% appears in the display. You can use the <Preset Copy Ratio> key together with the <Zoom Ratio> key to help you to set the specific copy ratio that you need.
CMS-XML Installation Procedure-PC 400 Series
Installation Procedure This copier is only designed for use with the power source shown on the marking label located on the back of the copier. If you are unsure of the power source, check with your local power company .
CMS-XML Installation Precautions-PC 400 Series
Power Supply This copier is designed only for use with the power source shown on the marking label on the back of the copier. If you are unsure if your power source meets these needs, check with your local power company .
CMS-XML Installation Procedure
Installation Procedure This copier is designed for use with a power source matching the power requirements shown on the marking label on the back of the copier. If you are unsure of the power source, check with your local power company .