| Search Results |
 |
Using the internal extender on the EF 200-400mm f/4L IS USM Extender 1.4x
|
Internal Extender Switch * There are times when an error message will be displayed and shooting operation is prevented. If this occurs, please turn the camera OFF and then ON.
|
|
|
Using Extenders (Sold Separately) with the EF 400mm f/2.8L IS III USM lens
|
Extenders Attach the extender to the lens, and then attach the camera. To detach it, reverse the order. Errors may occur if you attach the extender to the camera first.
|
|
|
Using Extenders (Sold Separately) with the EF 600mm f/4L IS III USM lens
|
Extenders Attach the extender to the lens, and then attach the camera. To detach it, reverse the order. Errors may occur if you attach the extender to the camera first.
|
|
|
Using the Image Stabilizer on the EF 600mm f/4L IS III USM lens
|
MODE 3 Shooting irregularly moving subjects Setting the STABILIZER switch to OFF is recommended when you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to ON, the Image Stabilizer may introduce errors .
|
|
|
TS-E90mm f/2.8 : How to set Exposure Compensation
|
When using a TS-E lens without tilting or shifting, all AR modes can be used as with normal lenses. Tilting or shifting, however, causes a metering error of up to one stop. since the slight exposure variation caused by this error depends on the tilt and/or shift amount, compensate the exposure as necessary.
|
|
|
How to set Exposure Compensation when using the TS-E17mm f/4L
|
The use of AE is not recommended when the lens is tilted or shifted as exposure errors may result. It is recommended that you use the exposure values when the tilt shift scale are set to the "0" position as a guide and then take the shot with as many exposure settings as possible
|
|
|
Using the Image Stabilizer Modes - EF-S17-85mm f/4.5-5.6 IS USM
|
Using the Image Stabilizer Mode Set the STABILIZER switch to OFF when you are taking pictures using the BULB setting (long exposures). If the STABILIZER switch is set to ON, the image stabilizer function may introduce errors . The Image Stabilizer might not be fully effective in the following cases:
|
|
|
Using rotation on the TS-E MACRO lenses
|
Using Rotation In order to prevent shifts in position while shooting, shooting with rotation locked or at a click position is recommended. If using digital Photo Professional to perform lens correction (lens aberration correction, Digital Lens Optimizer, etc.)*, shooting with rotation locked or at a click position is recommended so as to reduce the amount of correction error . *Supported cameras: EOS 6D Mark II (As of August 2017)
|
|
