Search Results |
|
Using the internal extender on the EF 200-400mm f/4L IS USM Extender 1.4x
Internal Extender Switch * There are times when an error message will be displayed and shooting operation is prevented. If this occurs, please turn the camera OFF and then ON.
|
|
|
Using Extenders (Sold Separately) with the EF 400mm f/2.8L IS III USM lens
Extenders Attach the extender to the lens, and then attach the camera. To detach it, reverse the order. Errors may occur if you attach the extender to the camera first.
|
|
|
Using Extenders (Sold Separately) with the EF 600mm f/4L IS III USM lens
Extenders Attach the extender to the lens, and then attach the camera. To detach it, reverse the order. Errors may occur if you attach the extender to the camera first.
|
|
|
MP-E65mm f/2.8 1-5X Macro Photo: How to I adjust magnification and effective f-number
Since other will be a slight exposure error using AE metering is not recommended. Take test shots first or use a handheld meter to determin the proper exposure based on the effective f-number. If youi use the f-number displayed by the camera, use the exposure factor in the table below to convert it.
|
|
|
Setting the exposure on the MP-E 65mm f/2.8 1-5x Macro Photo lens
Setting the Exposure Since there will be a slight exposure error , using AE metering is not recommended. Take test shots first or use a handheld meter to determine the proper exposure based on the effective f-number. If you use the f-number displayed by the camera, use the exposure factor in the table below to convert it.
|
|
|
Using the Image Stabilizer on the EF 200-400mm f/4L IS USM Extender 1.4x
Tips on Using the Image Stabilizer Set the STABILIZER switch to OFF when you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to ON, the image stabilizer function may introduce errors .
|
|
|
Using the Image Stabilizer on the EF 600mm f/4L IS III USM lens
MODE 3 Shooting irregularly moving subjects Setting the STABILIZER switch to OFF is recommended when you are taking pictures using the Bulb setting (long exposures). If the STABILIZER switch is set to ON, the Image Stabilizer may introduce errors .
|
|
|
Using Extenders - EF300mm f/2.8L IS II USM
Attach the extender to the lens, and then attach the OO lens to the camera. To remove it, reverse the order. Errors may occur if you attach the extender to the camera first.
|
|
|
TS-E90mm f/2.8 : How to set Exposure Compensation
When using a TS-E lens without tilting or shifting, all AR modes can be used as with normal lenses. Tilting or shifting, however, causes a metering error of up to one stop. since the slight exposure variation caused by this error depends on the tilt and/or shift amount, compensate the exposure as necessary.
|
|
|
How to set Exposure Compensation when using the TS-E17mm f/4L
The use of AE is not recommended when the lens is tilted or shifted as exposure errors may result. It is recommended that you use the exposure values when the tilt shift scale are set to the "0" position as a guide and then take the shot with as many exposure settings as possible
|
|