| Search Results |
 |
Here is a list of adjustments can be made on the Setting Title Page for the VB-C300
|
... by clicking " HELP " on the ... Enter a fixed IP address. ... , assign a fixed IP address with ... ... "1/ 60 ", and ... ... of 1/ 60 and 1/ ... ... : 1/ 60 PAL: 1 ... commercial frequency is 60 Hz. Note ... ... and for " Fixed at infinity" ... When focus adjustment is difficult (e.g., when shooting a night scene which has low contrast), it is recommended to fix the focus to infinity.
|
|
|
Here are some examples of Video Distribution Using One Fixed Global Address with the VB-C60
|
|
[IPsec] Setting IPsec
|
[IPsec] Setting IPsec (1) [IPsec] - Key settings for use with IPsec can be selected as [Auto Key Exchange ] or [Manual]. (1) [IPsec SA Encryption Algorithm] - Set the IPsec SA encryption algorithm to [AES- >3DES], [AES->3DES->DES] or [AES->3DES->DES - >NULL].
|
|
|
Setting Focus and Exposure
|
Use manual operations to focus on a desired position or fix at infinity. In manual operations, you can use the oneshot AF function to focus on the subject
|
|
|
Batteries may need to be recharged or replaced.
|
Batteries may need to be recharged or replaced if an error persists after battery recharge, or the unit may require a service evaluation. If the battery is currently in the device, and it is not working properly, remove the batteries and wait for 30 seconds and re-insert the batteries. In doing so, if your camera has a back-up or date and time battery, remove this battery as well.
|
|
|
How to connect the VB-C10 / VB-C10R to a Network
|
This section describes some typical installation modes for the VB-C10/VB-C10R. Be sure to assign a fixed IP address to the VB-C10/VB-C10R.
|
|
|
How to setup a Normal schedule in the software for the VB-C50FSi/VB-C50
|
With Normal Schedule, you can set up a schedule of one week from Sunday to Saturday. For example, during the weekend when there is nobody in the office from 6:00pm on Friday to 9:00am on Monday, the Motion Detection service will operate each week during the period of time you have specified and automatically monitor the office.
|
|
|
How to setup a Special Schedule in the software for the VB-C50FSi/VB-C50FS
|
With Special Schedule, you can set up a schedule on one specific day of the week. For example, on a public holiday when there is nobody in the office, set up a service to automatically monitor the office.
|
|
|
How to setup a Special Schedule in the software for the VB-C50i/VB-C50iR
|
With Special Schedule, you can set up a schedule on one specific day of the week. For example, on a public holiday when there is nobody in the office, set up a service to automatically monitor the office.
|
|
|
Changing the RS-232C Settings on a VC-C50i / VC-C50iR
|
Changing the RS-232C Settings on a VC-C50i / VC-C50iR These settings are used for controlling the VC-C50i/VC-C50iR from a PC or other device. The DATA 8 BIT and NON PARITY settings are fixed , and the menu is used to check them only. DATA 8 BIT and NON PARITY are to be read only.
|
|
