| Search Results |
 |
Cable Wiring Method
|
|
How to connect the VB-C50FSi / VB-50Fi to a Network
|
Next, connect the camera. Connect the camera to the network by connecting the camera and PC via the hub with a LAN cable .
|
|
|
How to connect the VB-C50i / VB-C50iR to a Network
|
Next, connect the camera. Connect the camera to the network by connecting the camera and PC via the hub with a LAN cable .
|
|
|
Audio Input/Output Terminals
|
Connecting the camera to an audio input/output device such as a microphone or a speaker with an amplifier allows you to send/receive audio through the viewer. Use the included audio interface cable to connect audio input/output devices to the camera. Use the 3.5 mm ( 0.14 in.) monaural mini-jack connector to connect an audio output device with the audio interface cable.
|
|
|
Notes on Power Supply (VB-H41 / VB-M40)
|
Only use the dedicated AC Adapter PA-V17 (sold separately) for AC power. Do not set any heavy objects on the power cable . Do not pull, forcibly bend, scratch, or modify the power cable.
|
|
|
Connecting the Camera (VB-hH41 / VB-M40)
|
The camera supports PoE functions. Power can be supplied to the camera by using a LAN cable to connect it to a PoE HUB that conforms to the IEEE 802.3af standard.
|
|
|
Display Screen of Camera Angle Setting Tool
|
(3) Control Assist - Displays dotted lines showing the range of pan operation and tilt operation. The camera angle cannot be changed to positions with no dotted lines.
|
|
 |
Installing the Camera
|
/ / / Installation Guide Camera Installation Guide (This document) Setup CD-ROM Warranty Card Notice Dedicated wrench Power Interface Cable I/O Interface Cable (BK2-0035-000) Power Interface Cable (Waterproof) LAN Connector Set (Waterproof) Symbols Indicating Camera Model
|
|
|
How to install (mount) the VB-C300
|
At least once a year, check for looseness in the camera installation mount. When routing the cables , pay much attention not to damage the indoor wiring or piping. Mounting the Camera at Upright Position
|
|
|
Changing the RS-232C Settings on a VC-C50i / VC-C50iR
|
Changing the RS-232C Settings on a VC-C50i / VC-C50iR The DATA 8 BIT and NON PARITY settings are fixed, and the menu is used to check them only. DATA 8 BIT and NON PARITY are to be read only. To view the following menu screens, connect the camera to a television using a video cable .
|
|
