Content Source
Connection Type
Operating System
Pages [Next]
Search Results
CMS-XML Make sure that the plug is plugged in correctly, and that the outlet works.
Connecting the camera to a power source: Connect the camera to the AC adapter . Connect the AC adapter to the AC cable. ... Whenever you turn the camera on, the first use of the PC or wireless controller to control the camera initializes the camera head position. ...
CMS-XML Controlling the VC-C50i or VC-C50iR with the WL-V5 Wireless Controller
What the Buttons on the Wireless Controller do While the wireless controller buttons are being used, the LED on the camera blinks green (at 0.1-second intervals). ... If the camera will not be used for an extended period, unplug the AC adapter from the wall outlet. ...
PDF Network Camera Camera Management Tool User Manual
... are discarded and replaced with the camera ... ... only update the Mobile Camera Viewer for ... Updating the Mobile Camera Viewer You can update the Mobile Camera Viewer for the camera selected in the camera list. 1 Select the camera to update the Mobile Camera Viewer in the camera list. 2 Select [Maintenance] > [Software Update] > [ Mobile Camera Viewer Update]. The [ Mobile Camera Viewer Update] dialog box is displayed. 3 Specify the Mobile Camera Viewer update file. ... The Mobile Camera Viewer will start to update.
CMS-XML Canon AC Adapter PA-V18
CMS-XML Notes on Power Supply (VB-H41 / VB-M40)
CMS-XML Preparations for initial setup of the VB-C10 / VB-C10R
Initial Setup 1. Turn on the PC's power switch. The AC adapter must not yet be connected to the VB-C10/VB-C10R at this stage.
CMS-XML Installing the Camera (VB-H710F / VB-M700F)
Connect the LAN cable. If AC Adapter PA-V17 (sold separately) or an external power supply is used, connect the power connector to the camera. Connect cables to the external device I/O terminals and audio input/output terminals as necessary.
CMS-XML Reset the ID correctly or cancel ID mode operation. VC-C50i & VC-C50iR
Setting the ID Number Switch the power to a camera off by unplugging the AC adapter connected to the camera. Even if you turn the power off, the ID number will not be cleared.
CMS-XML Audio Input/Output Terminals (VB-H41 / vb-M40)
}20% Microphone power supply : plug-in power (voltage: 1.8 V) * Supported microphones: Condenser microphones with plug-in power support
CMS-XML Connecting the Camera (VB-hH41 / VB-M40)
Õ The camera can also be connected to an AC adapter (sold separately) while receiving power from a PoE HUB. In such cases, the PoE power supply is given priority, and the camera does not use the power supply from the AC adapter (sold separately). When the PoE power supply is disconnected, power is supplied automatically from the AC adapter (sold separately).
Pages [Next]