| Search Results |
 |
Error when scanning "The number of pages that can be scanned at once has reached the upper limit." (D1300 Series)
|
The maximum number of pages has been exceeded when scanning through the ADF. The ADF can scan a maximum of 50 pages at a time, at 51 scanning will stop and the above error will be displayed.
|
|
|
Support Code 1874 is displayed - TR7520 / TR8520
|
What to Do Close the feed slot cover ( H ) of the rear tray
|
|
|
Support Code 1240 Displayed - TR7520 / TR8520
|
Follow these steps to clear the support code: Pull out the paper output tray (G), and paper output support ( H ) Open the output tray extension (I)
|
|
|
Resolve Support Code 1250 Issue for Your PIXMA MG5620 and Other Models
|
Open paper output tray Open the paper support (G). Gently open the paper output tray ( H ). Extend the paper output support (I).
|
|
|
Resolve Alarm Lamp Flash Errors - PIXMA PRO-1
|
Make sure the disc tray supplied with the printer (" H " is on the upper side) is in place. Properly place the printable disc on the tray, attach the disc tray again, then tap RESUME/CANCEL
|
|
|
An Error Message Is Displayed on the LCD - MX410
|
Check the device connected to the Direct Print Port. Printing photos directly is possible with a PictBridge compliant device or the optional Bluetooth Unit BU -30. A communication time out occurs if an operation takes too long or if it takes too much time to send data.
|
|
|
LCD Error Messages - MP470
|
Check your device connected to the machine. Only PictBridge compliant devices or the optional Bluetooth Unit BU -20 can be connected to the machine for direct printing.
|
|
|
LCD error messages (MX320)
|
An Error Message Is Displayed on the LCD Printing photos directly is possible with a or the optional Bluetooth Unit BU -30. A communication time out occurs if an operation takes too long or if it takes too much time to send data.
|
|
|
LCD error messages (MP520)
|
Error Message Is Displayed on the LCD Check your device connected to the machine. Only PictBridge compliant devices or the optional Bluetooth Unit BU -20 can be connected to your machine for direct printing.
|
|
|
LCD error messages on MP970
|
An Error Message Is Displayed on the LCD Check your device connected to the machine. Only PictBridge compliant devices or the optional Bluetooth Unit BU -20 can be connected to the machine for direct printing. If a PictBridge compliant device is connected via a USB hub, remove the hub and connect it directly to the machine.
|
|
