| Search Results |
 |
Connect the fax to the correct phone line
|
This will occur if there are multiple lines and telephone jacks in the same location. Or if the telephone jack is wired for two lines. For example, line one is to be used for voice calls and line two is to receive faxes .
|
|
|
Adjust VOIP (Voice Over Internet Protocol) settings.
|
If you are not using one of these two companies, the best thing to do would be to contact your VoIP provider for specific instructions and settings that will allow faxing through their service.
|
|
|
Sending a fax Overseas (from the U.S.) - PC1080F/D680/D780/D880
|
Sending a fax Overseas (from the U.S.) For additional details on international access codes (or codes other than the U.S.) contact your local telephone company. If necessary, press <Redial/Pause> to enter a two -second pause [P]. Use the numeric keys to dial the country code, the area code, and the fax/telephone number of the other party.
|
|
|
Resend the document to a G3 fax machine
|
> to select [ 2 . COMMUNICATIONS], then press <OK>.
|
|
|
2 on 1 copy-IC D/PC 1000 series
|
When Loading Documents in the ADF For imageCLASS D "*80" models, check if there are received faxes or faxes to be sent in memory. If so, wait for the machine to send and print any faxes, or delete any documents in memory before making a copy.
|
|
|
Creating a Speed Dial using a Calling Card
|
Sending a fax using a calling card requires some advanced planning. Follow these suggestions for creating a speed dial using a calling card. In order to program a speed dial for sending faxes using a calling card, it is important to know the timing sequence of the call. ... Select your language (i.e. "Press 1 for English, 2 for Spanish, etc.) ... Step 2 : Selecting the language message is 5 seconds.
|
|
|
Contact local phone company to check the telephone wall jack for low ring voltage.
|
Facsimile equipment ( fax machines ), like other telephone answering devices, require ring voltage at a telephone jack to answer automatically. The ring voltage is one of the services provided by the local phone company. Callers may hear one or two ring back tones and then ringing will stop and nothing else will be heard. ... To check if the fax will not answer due to low ring-in voltage, do the following: ... Disconnect the fax at the telephone wall jack. ... Dial the fax line and see if the answering machine answers the call, listen for uncommon ring tones inside the home or check for similar symptoms as described above.
|
|
|
Connecting to the Telephone Line and an External Device
|
Connecting to the Telephone Line and an External Device The machine has two jacks on the left side for connection of the following: ... If you need to send and receive faxes and voice calls, connect the cable from the telephone or answering machine to the "telephone" jack.
|
|
|
Enter outside dialing prefix before the fax number
|
Enter outside dialing prefix before the fax number .
|
|
|
Connect the answering machine to the fax machine-IC D/PC 1000 Series
|
Connect the answering machine to the extension port on the fax machine .
|
|
