| Search Results |
 |
Handling Documents with Forwarding Errors (E-Mail/I-Fax) ICMF9150c
|
Handling Documents with Forwarding Errors ( E -Mail/I-Fax)
|
|
|
ERROR LCD: System Error E000XXX
|
Turn OFF the main power switch, wait for more than 10 seconds, then turn it ON again. Additional trouble shooting by error code E000012
|
|
|
System Error E###-#### MF630 Series and MF730 Series
|
This article explains actions that can be taken by the end user for various system errors. The first four digits are the main error code , the second four are the sub code. The following models are cover by this article:
|
|
|
Forwarding Received Faxes by E-Mail
|
Step 2 Configure the machine to forward faxes automatically You may be able to determine the cause by checking the error code . Check the error code as follows.
|
|
|
Forwarding Received Faxes by E-Mail (MF753Cdw)
|
Step 2 Configure the machine to forward faxes automatically You may be able to determine the cause by checking the error code . Check the error code as follows.
|
|
|
Error LCD: System Error E000202
|
Error LCD : System Error E 000202
|
|
|
"Error Loading XML" when trying to view the e-Manual
|
When viewing the e -Manual, and error message reading " Error loading XML..." (the content of "...." varies according to the displayed screen) may be displayed, or certain parts of the screen may not be displayed. In these cases perform the following operations. Doing so may enable the e-Manual to be displayed properly.
|
|
|
Instructions for clearing error codes
|
When communicating with an SMTP server to send an e -mail/I-Fax, a timeout error occurred from the server.
|
|
|
Storing Forwarding Settings (e-mail/I-fax)
|
Storing Forwarding Settings (e-mail/I-fax) The maximum number of forwarding settings that you can store is 52 (12 for the Color imageCLASS MF9220Cdn): 50 (10 for the Color imageCLASS MF9220Cdn) with forwarding conditions and 2 without conditions. You can set whether to print e -mail/I-fax documents with forwarding errors , and whether to store them in memory.
|
|
|
Instuctions for clearing error messages
|
An error occurred when connecting in Access Point Mode. Set the IP address to other than "192.168. 22 .xx" in <Config. IP Address For Direct Conn.>. If you still cannot connect, check the subnet mask settings. For details, contact your Network Administrator.
|
|
