Search Results |
|
Sending a Fax Using PC Faxing
|
|
Resend the document to a G3 fax machine
Check with the other party and send the document to a G3 fax machine . If the other party does not have a G3 fax machine, try sending the document using a transmission mode the other party's fax machine supports.
|
|
|
Connect the answering machine to the fax machine-ICMF 8100
Connect the answering machine to the extension port on the fax machine .
|
|
|
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory
Contact the other party and have them load paper in their fax machine or free up space in their fax machine memory.
|
|
|
Sending a fax Overseas (from the U.S.) - ICMF 8100
Sending a fax Overseas (from the U.S.)
|
|
|
Receiving faxes in Manual Mode-ICMF 8100
Receiving Faxes Manually: Manual Mode Pick up the handset to answer the call. If the caller wants to send a document after talking to you, ask them to press the start key on their fax machine . When you hear a beep, press <B&W Start> on the machine to receive the fax, then hang up the handset.
|
|
|
Fax Settings Menu-ICMF 8100
5.RX RESTRICTION Sets whether to receive a fax by detecting the TSI (Transmitting Subscriber Identification) signal, used to identify the sending fax machine. 111111
|
|
|
Adjust VOIP (Voice Over Internet Protocol) settings.
Although VOIP is not supported, by adjusting the VOIP (Voice Over Internet Protocol) settings, you may be able to successfully send faxes .
|
|
|
Disconnect other device from the telephone line
Devices such as a computer modem, answering machine not connected to the fax or similar answering device may automatically pick up the call. Resend a test fax to your machine to make sure it answers. If your answering machine is not connected to the fax machine , the fax will not be able to detect the transmit signals emitted from the sending machine. Connect the answering machine to the fax as indicated, marked by a blue arrow in the magnified view.
|
|
|
Adjusting the TX REPORT Setting-ICMF 5700/8100
Adjusting the TX REPORT Setting The recipient's fax /telephone number (RECIPIENT ADDRESS) is not shown for the manually sent faxes . The machine does not print a TX report when faxing the documents from your computer.
|
|