| Search Results |
 |
Paper is Jammed - LX-P1300 / LX-D1300
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as “Paper jam #****” (**** represents numbers). Remove the paper jam according to the following steps:
|
|
|
Paper Is Jammed - LX-D5500 / LX-P5510
|
Paper Is Jammed When a paper jam occurs during printing, the printing is interrupted and the Status Monitor will display an error message such as "Paper jam #". Follow the steps below to remove the paper jam.
|
|
|
Replacing the Ink Tank(s) - LX-P1300 / LX-D1300
|
Replacing the Ink Tank (Indication by Ink lamp) An error message “XXXX ink empty” appears on the status monitor. (Indication on the status monitor)
|
|
|
Edit Characters and Lines - MK3000
|
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. Refer to the following to set the character size and frame.
|
|
|
Replace the Maintenance Cartridge - LX-D5500 / LX-P5510
|
Replacing the Maintenance Cartridge Close the maintenance cartridge door. The error message on the Status Monitor disappears, and printing will begin. Put the used maintenance cartridge in the plastic bag.
|
|
|
Replacing an Ink Tank - LX-D5500 / LX-P5510
|
Do not shake the ink tank. If you do, the error message "xxx ink empty" may appear immediately after replacing the ink tank. If this happens, remove the ink tank and insert it again.
|
|
|
Basic Printing Operations - MK3000
|
No error message will be displayed even if the print data extends beyond the width (top and bottom) of the print media. It is recommended to refer to the preview to make sure that no characters are missing before printing.
|
|
|
Maintain Ink Quality - LX-P5510
|
The display shown below pops up as soon as the error message [Exceeding ink refresh timing] appears. Click [Start Ink Refresh]. Click [Help] to check the ink refresh procedure.
|
|
|
Display and Use the Status Monitor - LX-D5500 / LX-P5510
|
Viewing the Printer Status An error message is displayed with the printer status, printing cannot be completed when an error is issued. Troubleshoot the problem as required.
|
|
|
Error / Warning Messages - LX-D5500 / LX-P5510
|
Service Call Error A fixed print speed is specified but the print speed is not optimal. Open the [ Advanced Settings] tab of the printer driver and then select the [Automatic Speed] in the [Print Speed]. Set the print speed to something slower than the current setting.
|
|
