| Search Results |
 |
Adjust the location of network device(s)
|
Network device location There is no source of radio wave interference in your vicinity. There may be a device such as a microwave oven using the same frequency bandwidth as the wireless station. Place the wireless devices as far away from the interference source as possible.
|
|
|
If setup does not automatically locate installation files, browse to the Windows folder to locate driver software for your device
|
If setup does not automatically locate installation files and the below message appears, open Device Manager and update the device driver( s ) by browsing to C:\Windows folder.
|
|
|
Replace the ink tank(s) - iP4820
|
Replace the Ink Tank(s) If you remove an ink tank, replace it immediately. Do not leave the printer with ink tanks removed . Use new ink tanks for replacement.
|
|
|
Replace the ink tank(s) - iP100
|
When ink runs out or an error occurs, follow the instructions below to change the affected ink tank(s): Once you remove an ink tank, replace it immediately. Do not leave the printer with ink tanks removed .
|
|
|
Replace the Ink Cartridge(s) - iP6310D
|
How to replace / install the ink cartridges Do not attempt to reattach the protective tape once you have removed it. Do not touch the gold electrical contacts or the print head nozzles after removing the protective tape.
|
|
|
Replace ink cartridge(s) iP2600
|
Untitled Document Do not attempt to reattach the protective tape once you have removed it. Do not touch the gold electrical contacts or the print head after removing the protective tape.
|
|
|
Replace ink cartridge(s) iP1600
|
Untitled Document Do not attempt to reattach the protective tape once you have removed it. Do not touch the gold electrical contacts or the print head after removing the protective tape.
|
|
|
Install the Ink Cartridge(s) Correctly - iP2700 / iP2702
|
Install the Ink Cartridge Securely If you remove a FINE Cartridge, replace it immediately. Do not leave the printer with FINE Cartridges removed .
|
|
|
Replace the ink tank(s) - iP4600
|
When ink runs out or an error occurs, follow the instructions below to change the affected ink tank(s): Make sure that the film is completely removed from the air hole (C) If the air hole is blocked with the remaining film, ink may leak out or may not eject properly.
|
|
|
Replace the ink tank(s) - iP3500
|
Replacing Ink Tanks *Do not squeeze the side of ink tanks as this may cause the ink to leak out and stain your clothes and hands. *Do not re-attach the protective cap once you have removed it. *Do not touch the open ink port once the protective cap is removed, as this may prevent the ink from being ejected properly.
|
|
