| Search Results |
 |
How to install the software for the DZ-3600U
|
Make sure that the DZ-3600U's power is off before you install the software. Attempting to install it with the power on will result in an [Unknown device] error message after installation. If you have already started to install the software with the power on, stop the installation, shut down Windows and turn off your computer.
|
|
|
Professional Model Firmware Updates
|
|
Error Notification Mails WUX7500 / WUX6700 / WUX5800
|
|
Error Notification Mails REALis 4K6020Z / 4K5020Z
|
|
What the exposure error warnings mean on the SX80 Mk II / SX800
|
What the exposure error warnings mean.
|
|
|
Setting an IP Address
|
Setting an IP Address It is possible to send an error notification e-mail from the projector to the computer when you connect the projector to the network.
|
|
|
Setting Up Email [Mail]
|
From [Mail] in the settings window, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to “Displaying and Configuring the Network Configuration Screen
|
|
|
Menu Install Settings WUX7500 / WUX6700 / WUX5800
|
Install settings Adjust projection to suit the screen or the type of images, or how the projector is installed. Menu screen when the input signal is HDMI Menus that are not available are grayed out or hidden. Positional lock Operation of installation-related functions can be prohibited. • Image flip H/V • Save position (in [Lens - Position]) • Professional settings • Screen aspect • Focus adjustment • Zoom • Lens shift reset • Lens shift adjustment • Keystone • Digital image shift • Zoom adjustment
|
|
|
Multiple Projectors Corner Adjustment WUX7500 / WUX6700 / WUX5800
|
Corner Adjustment Projected images from multiple projectors used in overlapping projection must be precisely repositioned. Positions of each corner in the blending area can be aligned with the blending area of the reference projector. 1 On the reference projector, configure keystone (P145) and edge-blending settings, and then set the edge-blending markers to [On]. 2 Select [Install settings] > [ Professional settings] > [Edge blending] > [Adjust] > [Corner adjustment]. 3 Select a point to adjust, and move it so that the image as a whole looks symmetrical. 4 As you watch the projected images, fine-tune markers of the projector you are adjusting so that they overlap the reference projector markers as much as possible.
|
|
|
Determining the Installation Position
|
Place the projector perpendicular to the screen as far as possible. A slight error in the projection angle can be corrected using the [KEYSTONE] button Placing on a Level Place
|
|
