| Search Results |
 |
How to install the software for the DZ-3600U
|
Make sure that the DZ-3600U's power is off before you install the software. Attempting to install it with the power on will result in an [Unknown device] error message after installation. If you have already started to install the software with the power on, stop the installation, shut down Windows and turn off your computer.
|
|
|
Menu Image Adjustment WUX7500 / WUX6700 / WUX5800
|
Brightness Adjust image brightness. Contrast Sharpen or soften image contrast. Sharpness Adjust image sharpness. Gamma Correct image areas that are too dark or too bright to see clearly. Color adjustment Adjust color-related settings such as color level, color balance, and color temperature. In [DICOM SIM] image mode, [Color temperature] is not adjusted with numeric values but set to one of the following five presets. Preset 1: Prioritize brightness, relative to DICOM Standard Part 14 . Preset 2: Prioritize color tone, relative to DICOM Standard Part 14 . Preset 3: Adjust color to conform to DICOM Standard Part 14 . Preset 4: Reproduce colors of X -ray film (Clear base). Preset 5: Reproduce colors of X -ray film (Blue base). Advanced adjustment Fine-tune noise reduction and color tone. Ambient light Minimize the effect of ambient light on the screen. [Ambient light] is available when the image mode is [Photo/sRGB] Random noise reduction Reduce random image noise*. * Effective on noise with an irregular frequency or amplitude.
|
|
|
Error Notification Mails WUX7500 / WUX6700 / WUX5800
|
|
Error Notification Mails REALis 4K6020Z / 4K5020Z
|
|
What the exposure error warnings mean on the SX80 Mk II / SX800
|
What the exposure error warnings mean.
|
|
|
Setting an IP Address
|
Setting an IP Address It is possible to send an error notification e-mail from the projector to the computer when you connect the projector to the network.
|
|
|
Setting Up Email [Mail]
|
From [Mail] in the settings window, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to “Displaying and Configuring the Network Configuration Screen
|
|
|
DICOM SIM MODE explained (Wux10 Mk II D)
|
In the DICOM simulation mode (hereinafter referred to as "DICOM SIM"), this projector can project a monochrome medical image such as an X ray radiography, CT image, MRI image, etc. in the tone similar to the DICOM (Digital Imaging and Communications in Medicine) standard. Typically, to project the image according to the DICOM standard, it requires the grayscale tone correction using a luminance meter according to the environment. In this projector, there are 21 types of tone settings for various ambient lights.
|
|
|
How to access the Control Panel in Windows 8
|
On your keyboard, hold the windows key and press " X ". Click Control Panel
|
|
|
Determining the Installation Position
|
Place the projector perpendicular to the screen as far as possible. A slight error in the projection angle can be corrected using the [KEYSTONE] button Placing on a Level Place
|
|
