| Search Results |
 |
Computer Input - Image Mode Selection
|
Colorboard - At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Use the Point
|
|
|
IVIDEO Input - mage Mode Selection
|
Colorboard At the time of simple projection on the colored wall, you can get the close color image to the color image projected on a white screen by selecting the similar color to the wall color from the preset four colors. Use the Point
|
|
|
Advanced Registration to Adjust Projected Images REALis 4K6020Z / 4K5020Z
|
The projector enters 5-point adjustment mode, and a chart is displayed. With advanced registration, checkered or halftone image areas may be affected by uneven colors or image artifacts. 2 Use the
|
|
|
Projecting Two Images Side by Side WUX7000Z / WUX6600Z / WUX5800Z
|
• Some functions are not available, such as [Image flip H/V] (P150), [Screen aspect], [Keystone] and [Logo capture] • For split-screen image adjustment, use the [Image priority] setting • Image mode colors differ somewhat from those in single- image mode.
|
|
|
Manual Adjustment to Correct Registration REALis 4K6020Z / 4K5020Z
|
The projector enters manual adjustment mode, and a chart is displayed. With advanced registration, checkered or halftone image areas may be affected by uneven colors or image artifacts. 2 Use the
|
|
|
Here are the Menu Descriptions & Functions [Image adjustment] for the LV-8320
|
When Blackboard (Green) or Colorboard is selected in Image select, Color temp. will change to Blackboard or Colorboard.
|
|
|
Menu Image Adjustment WUX7500 / WUX6700 / WUX5800
|
Brightness Adjust image brightness. Contrast Sharpen or soften image contrast. Sharpness Adjust image sharpness. Gamma Correct image areas that are too dark or too bright to see clearly. Color adjustment Adjust color -related settings such as color level, color balance, and color temperature. In [DICOM SIM] image mode, [ Color temperature] is not adjusted with numeric values but set to one of the following five presets. Preset 1: Prioritize brightness, relative to DICOM Standard Part 14. Preset 2: Prioritize color tone, relative to DICOM Standard Part 14. Preset 3: Adjust color to conform to DICOM Standard Part 14. Preset 4: Reproduce colors of X-ray film (Clear base). Preset 5: Reproduce colors of X-ray film (Blue base). Advanced adjustment Fine-tune noise reduction and color tone. Ambient light Minimize the effect of ambient light on the screen. [Ambient light] is available when the image mode is [Photo/sRGB] Random noise reduction Reduce random image noise*. * Effective on noise with an irregular frequency or amplitude.
|
|
|
Menu Description Install settings REALis 4K6020Z / 4K5020Z
|
> [Install settings] > [Screen color] You can adjust the color quality of the images projected according to the color of the projection screen. Iris
|
|
|
Connecting a computer or monitor
|
• When you switch to HDMI input, the projected picture may display wrong colors for about 1 second. This is not product malfunction.
|
|
|
Image Adjustment - Adjusting the Color Temperature
|
