Setting an IP Address It is possible to send an error notification e -mail from the projector to the computer when you connect the projector to the network.
Setting and IP Address (SX80 Mk II) Setting an IP Address It is possible to send an error notification e -mail (P119) from the projector to the computer when you connect the projector to the network.
Make sure that the DZ-3600U's power is off before you install the software. Attempting to install it with the power on will result in an [Unknown device] error message after installation. If you have already started to install the software with the power on, stop the installation, shut down Windows and turn off your computer.
Setting items: [To:]: The E -mail address to which the error report is sent (Within 63 alphanumeric characters) [Cc:]: The E-mail address to which the carbon copy of the error report is sent (Within 63 alphanumeric characters, can be omitted)
ii. When the projector is in abnormal conditions, the following information will display. When the projector is in normal conditions or in any abnormal conditions other than the ones mentioned below, the Error Status column will be "0:No Error ". iii. Press this button to go back to the remote network operation page.
From [Mail] in the settings window, you can set the items necessary to send error mails and test mails. For the setting procedure, refer to “Displaying and Configuring the Network Configuration Screen
Place the projector perpendicular to the screen as far as possible. A slight error in the projection angle can be corrected using the [KEYSTONE] button Placing on a Level Place