Content Source
Pages [Next]
Search Results
... Canon projectors can help museums bring out ... ( 17 :9) ... ( 17 :9) ... ... LENS SHIFT ( 17 :9) ... MINI JACKAudio Output x1, DC 12V Trigger, Wired Remote Control Connection Audio Input x1, Audio Output x1, Wired Remote Control Connection Audio Input x1, Audio Output x1, Wired Remote Control Connection
CMS-XML How to Set RS-232C Settings on the WUX10
While the WUX10 does have an RS-232 connection and codes as you mentioned, CITS does not assist in the use of them.
CMS-XML Here are some common troubleshooting tips for the LV-X2
Before calling your dealer or service center for assistance , check the following: 1. Make sure you have connected a projector to your computer or video equipment as described in the section "CONNECTING THE PROJECTOR"
CMS-XML Charging functions Rayo S1
You must only use an authentic charger ( DC 5V/2A). Use of a non-certified charger can cause a malfunction.
CMS-XML Menu System settings WUX7500 / WUX6700 / WUX5800
Menu screen when the input signal is HDMI Menus that are not available are grayed out or hidden. User screen settings Capture a logo and specify logo display settings. Logo capture Registers the current image as a user logo. Registered user logos can be shown when no signal is received, when the BLANK button is pressed, or as the startup image. Only images at an aspect ratio of 16:10 can be registered as user logos. Logo position Specify the position of registered user logos. You can specify the position after a logo has been registered. Choose from upper left, upper right, center, lower left, or lower right. No signal screen Customize the screen shown when no input signals are received. Screen when blank Select the screen shown when projection is temporarily blanked out by pressing the BLANK button on the remote control. Projector on Select a logo to project after startup until input signals can be projected. On screen Specify display details for on-screen menus, help , and warning or precaution icons. Menu position Reposition menu display. Choose from upper left, upper right, center, lower left, or lower right. Only [Center] is available when edge blending is used. Other display positions are grayed out and not available. Menu display time Extend menu display from the standard 10 or 30 seconds to 3 minutes. The following display times are also changed. Guide Shows the guide screen.
CMS-XML Power Management mode
image appears and the countdown begins. After the countdown, the lamp will be off. This function helps to save power consumption and extend the lamp life.
CMS-XML List of software bundled with the DZ-3600U
This application program assists in creating effective full-featured presentations with the DZ-3600U Digital Document Camera. It allows you to adjust the size and brightness of the high-definition still images captured by the camera for display with a projector or other device. Because you can capture any number of images in advance, and even switch between application programs on the fly, your presentations will progress smoothly and naturally.
CMS-XML Using as a portable battery Rayo S1
Note Charging capacity: DC 5V, 1A/h The maximum charging time differs from device to device.
CMS-XML Rayo S1 Mini Projector Specifications
Product Specification BT4.0 Output Audio ΓΈ3.5mm jack Internal speaker 3W (Woofer) Wireless specification Respponsive OS iOS, Android, Windows OS Specification Frequency 2.4GHz / 5GHz Channel 802.11 a/b/g/n Adapter Speciifcation Adapter Type Switching power supply Model Name S012CDU0500240 Manufacture TEN PAO INDUSTRIAL CO LTD Input 100-240V a.c., 50-60Hz, 0.4A Output DC 5V
CMS-XML IVIDEO Input - mage Mode Selection
This mode helps enhance the image projected on a blackboard. This is mainly effective on a green colored board, not truly effective on a black colored board.
Pages [Next]