| Search Results |
 |
Wireless LAN (Wi-Fi) Legal information WUX7500 / WUX6700 / WUX5800
|
FCC/IC NOTICE Model: WUX7500/WUX6700/WUX5800 (including WLAN Module Model CH 9 -1346, FCC ID : AZD221)
|
|
|
Application (My App) Rayo S1
|
You can set up a Wi-Fi connection to a Cannon digital camera to project images and videos from the camera on to the projector. ... You can only use this feature for Cannon digital cameras that supports Wi-Fi connections (some do not support Wi-Fi connection). ... For more about how to use it, see Help in the application or visit the website (https://www.wps.com/android).
|
|
|
Using the Browser Rayo S1
|
... as a separate mobile Wi-Fi router. Wi-Fi network connection ... Turn off the Wi-Fi function when not ... ... screen, select Wi-Fi from the Setting ... ... . Select the Wi-Fi you want to ... list of available Wi-Fi network list. ... connect to the Wi-Fi network. ... connected to the Wi-Fi that was previously ... ... connection to the Wi-Fi network, long press the Wi-Fi network and delete ... You can check or manage the list of applications for Downloads/SD Card /Currently Running/All.
|
|
|
Connecting to a Network WUX7000Z / WUX6600Z / WUX5800Z
|
Connection Methods The projector can be connected to a wired network with a LAN cable or to a wireless network via Wi-Fi . Wired Networks
|
|
|
Basic Wireless Network Settings [Wireless] WUX7000Z / WUX6600Z / WUX5800Z
|
Basic Wireless Network Settings [ Wireless ] WUX 7000 Z / WUX6600Z / WUX5800Z
|
|
|
How to Set RS-232C Settings on the WUX10
|
While the WUX10 does have an RS -232 connection and codes as you mentioned, CITS does not assist in the use of them.
|
|
 |
2018 CANON PROJECTOR LINE-UP
|
• LCOS Technology with AISYS-enhancement • Native WUXGA Resolution (1920 x 1200) • 7000 Lumens with up to 4000:1 Contrast Ratio*2,6 • Laser Light Source with 20,000 Hours* 3 • Compact and Lightweight Design • Multiple Genuine Canon Interchangeable Lens OptionsProvideExceptionalQualityandFlexibility • High Dynamic Range (HDR) Compatible • HDBaseT™ & Wi-Fi ® • MotorizedLensShift,4-pointKeystoneCorrection and Lens Position Memory • Built-in Edge Blending • Versatile Connectivity including HDMI and DVI • Multiple Image Modes including DICOM® ...
|
|
|
Using PC-Free Multi Projection WUX7500 / WUX6700 / WUX5800
|
Using PC-Free Multi Projection A JPEG image on a USB flash drive can be divided among up to nine projectors and combined into a single, large image. When projectors are connected via a wired LAN, the projector that produces the image in the upper left is called the Primary projector and the other eight, Secondary projectors. The image as a whole is controlled by the Primary projector PC-free multi projection is not available over a wireless LAN. This feature is available with the following number of projectors and layout patterns. The projector you assign as the Primary projector, identified in the layout pattern as [1], always projects the upper-left image. Set up the projectors as follows. 1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries. Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Secondary]. Complete this setting on each Secondary projector 4 Configure one projector as the Primary projector. (1) Select [Input settings] > [PC-free multi projection] > [Mode setting] > [Primary]. (2) Configure the following settings in [PC-free multi projection].
|
|
|
Controlling the Projector from a Computer WUX7000Z / WUX6600Z / WUX5800Z
|
The factory default IP address is “192.168.254.254” for wired connections and “192.168.253.254” for wireless connections. If DHCP settings are used, ask the network administrator for the projector IP address. It is possible to check the IP address from the projector menu
|
|
|
Using PC-Free Multi Projection WUX7000Z / WUX6600Z / WUX5800Z
|
1 On each projector, configure installation and image adjustment settings such as edge blending and keystone correction to blend overlapping areas. 2 Connect the projectors with LAN cables and set [Network (wired/ wireless )] to [On/Off] or [On/On (Pj AP)] 3 Configure some projectors as Secondaries.
|
|
