| Search Results |
 |
Specifications (P-215)
|
... 8 to 216 mm ( 2 to 8 .5" ... 70 to 356 mm (2. ... 1,000 mm (39. ... ... 0.15 mm (0. ... 9 to 108 mm (3. ... 152.4 mm (5 to ... ... 0.3 mm (0. ... 49 to 55 mm (1. ... 85 to 91 mm (3. ... ... 0.3 mm (0. ... ) Width 86 mm (3. ... ) Length 54 mm (2. ... 0.76 mm (0. ...
|
|
|
Error Codes for the DR-G2090, G2110, and G2140 scanners
|
Error [P***] Paper jammed in scanner Error [C***] Scanner cover is open Error [J***] Paper feed error detected Error [J***] A document was skewed Error [D***] A double paper-feed has occured Error [J*** ] Staple was detected Error [J***] Dust was detected Error [U***] The count does not match Error [ E ***] Scanner hardware problem
|
|
|
Compatible operating systems - 8800F
|
Compatible Operating Systems Windows XP (x64) Windows 2000 Mac OS X (10. 2.8 -10.3.x) Mac OS X (10.4.x)
|
|
|
Using the scanner push-buttons (8600F)
|
Using the Scanner Buttons * Before using the scanner buttons in Mac OS X 10.3 or 10. 2.8 , you need to set CanoScan Toolbox to open automatically when a scanner button is pressed. Using Scanner Buttons in Mac OS X 10.3/10.2.8 For instructions:
|
|
|
What documents can I scan with my DR-M1060 / DR-M1060 II Scanner?
|
Width: 50.8 mm to 300 mm (2" to 11.8") Length: 70 mm to 432 mm ( 2.8 " to 17") Up to 3,000 mm (118.1") in Long Document mode
|
|
|
Documents (DR-G1130/G1100)
|
Size Length : 70 mm to 432 mm ( 2.8 " to 17") (without using the Long Document Mode) 70 mm to 3,000 mm (2.8" to 118.1") (Using [ON2] in the Long Document Mode)
|
|
|
Documents (P-215)
|
Document Type Width Length Thickness (density) Thickness Plain paper 50.8 to 216 mm ( 2 to 8 .5") 70 to 356 mm (2.756 to 14")¹ 52 to 128 g/m² (14 to 34 lb bond)
|
|
|
Common Problems and Solutions - Memory becomes insufficient and scanning stops.. (DR-F120)
|
Common Problems and Solutions If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions ( e .g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through / Remove Background] if they are set to on.
|
|
|
Common Problems and Solutions (P-215)
|
A high resolution (600dpi etc.) is specified for [Dots per inch]. If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions ( e .g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through / Remove Background] if they are set to on.
|
|
|
How do I scan documents longer than 14 inches (356 mm) on my DR scanner?
|
When scanning large-sized documents with the Long Document mode, scanning may be slower. Errors may also occur due to memory shortage and scanning may be disabled.
|
|
