| Search Results |
 |
Clean and Sanitize Your Printer and Scanner Equipment
|
Cleaning of Printer and Scanner Products For cleaning and to help sanitize Canon PIXMA, MAXIFY, WG-Series and Finetech Printers as well as CanoScan Scanners , we recommend the following. ... Turn the device’s power off and unplug from power source and/or remove the battery (for mobile printers).
|
|
|
How do I connect my R50 scanner to a Wi-Fi network?
|
https://www.usa.canon.com/internet/portal/us/home/support/details/ scanners /document-scanner/ imageformula -r50-office-document-scanner/canon- imageformula -r50-office-document-scanner
|
|
|
Unable to scan with the DR-C225W / C225W II on macOS 11 (Big Sur) using Wi-Fi
|
https://www.usa.canon.com/internet/portal/us/home/support/details/ scanners /document-scanner/ imageformula -dr-c225w-ii/ imageformula -dr-c225w-ii-office-document-scanner?subtab=downloads-firmware Once the firmware has been updated, you will need to download and install the latest versions of the following files: - TWAIN Driver
|
|
|
macOS 11 (Big Sur) support for imageFORMULA scanners
|
NA10 It is important to note that all 4 of the following softwares must be updated in order to enable WiFi on macOS 11: - CaptureOnTouch
|
|
|
How do I connect my DR-S150 scanner to a Wi-Fi network?
|
If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to the scanner. To ensure good Wi-Fi communications, perform this procedure with the scanner located close to the access point. Connect the computer to the access point via Wi-Fi before you begin.
|
|
|
What are the features of the P-208 doucment scanner?
|
Features of the Scanner Equipped with Feeder Up to 10 pages of a document can be loaded and then fed continuously, or one at a time. Wi-Fi connectivity
|
|
|
Wi-Fi Connection using a Specified Access Point
|
Connecting to a Specified Access Point " Wireless connection to the scanner is completed." is displayed when the connection is verified. Setup is completed.
|
|
|
Wi-Fi Connection using the WPS Function
|
Connecting using the WPS Function " Wireless connection to the scanner is completed." is displayed when the connection is verified. Setup is completed.
|
|
|
Scanning with the Scanner on the Stand (LiDE 500F)
|
Scanning on the Stand - CanoScan LiDE 500F Close the document cover. The document cover contains a magnet to help it stick to the scanner body.
|
|
|
Wi-Fi Connection using the AP Mode
|
Connecting using the AP Mode Press and hold the power button until the indicator goes out. 2. Turn on the AP switch and the Wireless switch on the rear of the scanner . 3. Turn on this scanner.
|
|
