| Search Results |
 |
Clean and Sanitize Your Printer and Scanner Equipment
|
For cleaning and to help sanitize Canon PIXMA, MAXIFY, WG-Series and Finetech Printers as well as CanoScan Scanners, we recommend the following. ... Turn the device’s power off and unplug from power source and/or remove the battery (for mobile printers).
|
|
|
Unable to scan with the DR-C225W / C225W II on macOS 11 (Big Sur) using Wi-Fi
|
If you are experiencing difficulties using the DR-C225W or DR-C225W II wireless (via Wi-Fi ) on macOS 11 (Big Sur), please follow the steps listed below.
|
|
|
How do I connect my DR-S150 scanner to a Wi-Fi network?
|
Use the Wireless Connection Tool to automatically acquire the required network information from the wireless settings of the computer connected to the access point, and connect the DR-S150 to the same network. Follow the steps listed below to successfully connect your scanner to a wireless ( Wi-Fi ) network.
|
|
|
How do I connect my R50 scanner to a Wi-Fi network?
|
Follow the steps listed below to successfully connect your scanner to a wireless ( Wi-Fi ) network.
|
|
|
Wi-Fi Connection using a Specified Access Point
|
Connecting to a Specified Access Point To connect the scanner to a computer via an access point that does not support WPS, select the access point for wireless connection from a list. - If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to this scanner. - To ensure good Wi-Fi communications, perform this procedure with the scanner initially located close to the access point.
|
|
|
Wi-Fi Connection using the WPS Function
|
Connecting using the WPS Function - If the access point is using security settings (such as MAC address filtering), change the settings to allow connection to this scanner. - To ensure good Wi-Fi communications, perform this procedure with the scanner initially located close to the access point. 1.
|
|
|
How to Connect Smart Devices
|
How to Connect Smart Devices 3. Turn on this scanner. 4. From the smart device [Settings], tap [ Wi-Fi ] to confirm that it is enabled. 5. For the network selection, select the SSID from step 2.
|
|
|
How do I make an ad-hoc (one-to-one) connection between the WA10 and a computer (or smart device equipped with wireless LAN capability)?
|
The WA10's factory default setting is AP mode. Search for the wireless network, and establish Wi-Fi connection with the WA10. 1) Click the
|
|
|
What are the features of the P-208 doucment scanner?
|
Features of the Scanner Equipped with Feeder Up to 10 pages of a document can be loaded and then fed continuously, or one at a time. Wi-Fi connectivity
|
|
|
Unable to connect to DR-C225W or DR-C225W II via Wi-Fi on macOS 10.13 using Network Setting Tool
|
