| Search Results |
 |
Main Features (DR-G1130/G1100)
|
Scanner Features Variety of Scanning Modes The scanner is equipped with six scanning modes: Black and White, Error Diffusion, Advanced Text Enhancement, Advanced Text Enhancement II, 256-level Gray, and 24-bit Color. * Advanced Text Enhancement can clarify scanned text by processing background or foreground colors.
|
|
|
Why are some of the driver settings grayed out on my DR-G2xx0 Series Scanner?
|
Contrast Detect automatically O Black and White O Error Diffusion O Advanced Text Enhancement X Advanced Text Enhancement II O Active Threshold O 256-level Gray O 24-bit Color O (O: Available for setting, X: Not available for setting, or auto)
|
|
|
Displayed Error Codes
|
When a scanning error occurs, the following error codes are displayed in the Job. No. Indicator.
|
|
|
DR Scanner driver not found / TWAIN Error
|
While attempting to scan you receive the error message "Driver not found" or a TWAIN error . Do you know if a Windows update was applied recently? If so, it is possible that the .INI
|
|
|
Check Error Message on Control Panel (DR-G1130/G1100)
|
When document feeding is interrupted, an error message will appear on the display panel.
|
|
|
Error "Cannot load driver" when using the DR-C225W
|
If you are connected via USB and receive this message, make sure the Wireless button on the back of the scanner is set to "OFF". By default, it is set to "ON" and you will receive this error message if trying to use the scanner via USB.
|
|
|
Received "Out of memory error" while scanning
|
If an error message appears due to insufficient memory while scanning is in progress, exit the application, change the scanning conditions (e.g. reduce the resolution or page size) and then try scanning again. In addition, the amount of memory used can be contained by turning off [Moire Reduction] and [Prevent Bleed Through/Remove Background] if they are set to on.
|
|
|
ERROR : Device cannot be Locked.
|
|
Specifications (P-215)
|
to 1.4 mm (0.055") for embossed cards Document Feeding Method Automatic Scanning Sensor Contact Image Sensor Light Source LED Scanning Side Simplex/Duplex Scanning Modes Black and White, Error Diffusion, 256-level Grayscale, Advanced Text Enhancement II, 24-bit Color Scanning Resolution 150 x 150dpi/200 x 200dpi/300 x 300dpi/400 x 400dpi
|
|
|
Clearing Paper Jams, Skewed Documents, Stapled Documents, and Feed Errors - DR-M1060 / DR-M1060 II
|
After removing the jammed paper, check to see if the last page was scanned correctly, and then continue scanning. When the [Rapid recovery system] check box is enabled in the advanced settings dialog box, you can resume a scanning operation even if it is interrupted by a paper jam by removing the document and resuming from the document that was being fed when the interruption occurred.
|
|
