| Search Results |
 |
Scanning an image with IS Scan - Windows
|
Scanning an Image Install the IS-12 or IS-22 Color Image Scanner Cartridge in the appropriate printer. Make sure Canon IS Scan 2 is set as the Acquire Source and then select the command used for scanning (such as Acquire
|
|
|
Calibrate the Scanner from a Mac - MX922
|
If scanned images have incorrect colors , calibrating the scanner may help resolve the problem.
|
|
|
Using the scanner push-buttons (5600F)
|
Using the Scanner Buttons [COLOR] Button Scans color images in A4 or Letter size* at 300 dpi. [BLACK & WHITE] Button
|
|
|
Use the white calibration sheet - IS-12 Scanner cartridge - BJC-85
|
Using the White Calibration Sheet When cleaning the white calibration sheet, use a soft cloth that is dipped in a weak, neutral detergent solution, and then wipe its wet surface off with a dry, soft cloth. The white level calibration data is stored into memory and used for maintaining the correct color balance of scanned images . When a message appears and prompts you to load the white calibration sheet, click the 'OK' button and perform white level calibration.
|
|
|
ScanGear Preferences (Color Settings Tab) - CanoScan 4200F
|
Preferences Dialog ( Color Settings tab) Select a color correction method from ... ... This option displays colors vividly on computer ... ... the Canon ColorGear color management system. It makes colors consistent between the ... monitor and a color printer. No color correction is performed ... ... enabled when the Color mode ... is set to Color or Color (48 bit ... The Color ... is selected since color correction is automated ... (The Color Source ( Scanner ) Sets the scanner profile. ... Sets the RGB color space profile such ... ... , the preview image is converted to the monitor's RGB color space and displayed ... ... converted to the color space specified in ...
|
|
|
Scanner specifications MX850
|
Scanner Element CIS (Contact Image Sensor) Color Scanning Resolution
|
|
|
Correcting Images and Adjusting Colors with ScanGear (Scanner Driver)
|
Reading Tone Curves With ScanGear, scanning images via a scanner is the input, and displaying to a monitor is the output. "Tone Curve" shows the balance of tone input and output for each Channel.
|
|
|
Calibrating the scanner (9950F)
|
Calibrating the CanoScan 9950F Calibrate the scanner if the colors in the preview image vary significantly from those in the original item or colors appear in areas that should be white. Clicking the 'Execute' button starts the calibration process, which will allow scanned images to be adjusted to the proper coloration.
|
|
|
Calibrating the Scanner - 9900F, 8400F, 8000F, 5000F, 4200F, 3200F, 3000F, 3000ex
|
Calibrating the Scanner Calibrate the scanner if the colors in the preview image vary significantly from those in the original item or colors appear in areas that should be white. Clicking the 'Calibration' button starts the calibration process, which will allow scanned images to be adjusted to the proper coloration.
|
|
|
Calibrating the Scanner (LiDE 500F, LiDE 25, LiDE 60)
|
Calibrating the Scanner (LiDE 500F, LiDE 25, LiDE 60) Calibrate the scanner if the colors in the preview image vary significantly from those in the original item or colors appear in areas that should be white. Clicking the Calibration button starts the calibration process, which adjusts the scanned image to the proper coloration.
|
|
