Search Results |
|
Adjust the location of network device(s)
Network device location There is no source of radio wave interference in your vicinity. There may be a device such as a microwave oven using the same frequency bandwidth as the wireless station. Place the wireless devices as far away from the interference source as possible.
|
|
|
Setup the MX860 for use over a wireless LAN
Wireless Setup page to assist you in setting up your printer on your network. Click the appropriate link( s ) below for help . If you have already set up your printer on the network with one computer and want to set up additional computers to work with your printer
|
|
|
Setup the MP990 for use over a wireless LAN (Windows)
Wireless Setup Step-by-step instruction is available on our Wireless Help page to assist you in setting up your printer on your network. Click the appropriate link( s ) below for help .
|
|
|
LCD Error Messages - MX410
... valid when an operator call error occurs ... In some operator call errors, ... Fax related messages ... Replacing Cartridge( s ) ... Replacing Cartridge( s ) ... correct cartridge( s ) properly ... correct cartridge( s ) properly ... Replacing Cartridge( s ) ... contained in the fax may be lost ... , the received fax will not be ... ... manually print out faxes that were stored ... ... that the received fax is forcibly printed ... part of the fax information may not ... ... Replacing Cartridge( s ) ... contained in the fax may be lost ... , the received fax will not be ...
|
|
|
How to set the communication channel on the 430EX II Speedlite.
When the receiver unit ( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec intervals
|
|
|
The Flash does not Fire during Wireless Flash Shooting
When the receiver unit( s ) is ready to fire (fully charged), the AF- assist beam will blink at 1-sec. intervals.
|
|
|
Replace ink tank(s) MP640
If you remove an ink tank, replace it immediately. Do not leave the machine with ink tanks removed .
|
|
|
550EX Speedlite : How to turn the Master Flash OFF and use just receiver unit(s).
The flash ratio can also be changed by changing the distance of the receiver units to the subject. With the EOS 1D, 1V, 3, D60, D30, Elan 7/7E and 30/33, you can use the modeling flash to check the lighting effect
|
|
|
Kit contents for the VIXIA HF21
WS-30 Wrist Strap CTC-100/ S Component Cable Red / Green / Blue plugs STV-250N Stereo Video Cable Yellow / Red / White plugs
|
|
|
Kit contents Elura 40MC
Kit contents Elura 40MC Lithium button battery CR1616 S -Video Cable S -150 SDC-8M SD Memory Card
|
|