| Search Results |
 |
Support Code 15A1 is displayed - TS702
|
What to Do LCD and advance printer
|
|
|
Support Code 1317 Appears - TC-20 / TC-20M
|
Cause Paper loaded crooked was detected when the paper was advanced .
|
|
|
Support Code 1024 Appears (Roll Paper is Empty) - TC-20 / TC-20M
|
Cause Roll paper is empty. There is remaining roll paper, but because it could not be advanced , it could not be detected.
|
|
|
Hardware error. xxxxxxxx-xxxx (Here, x represents a letter or number) Turn off printer, wait, then turn on again. (iPF6100/iPF610/iPF710)
|
Hardware error. xxxxxxxx-xxxx (Here, x represents a letter or number) Turn off printer, wait, then turn on again. (iPF6100/iPF610/iPF710) Turn off the printer and wait at least three seconds before restoring power. However, keep the printer off and remove the roll if the last portion of roll paper was used during a print job and paper could not be advanced because the trailing edge is taped to the roll. If tape and the Belt Stopper have not been removed from inside the Top Cover , turn off the printer, open the Top Cover , and remove the tape and Belt Stopper before restoring power.
|
|
|
Support Code 88 Appears When Attempting to Print (Mac)
|
In the Print dialog, click on the Pop-up menu (this will usually show the name of the program that you are printing from). In the Pop-up menu, click Advanced Paper Settings If you are using macOS 13, Advanced Paper Settings
|
|
|
What the error warning messages mean in stopped-down photography.
|
To prevent this before you mount a lens , make sure there is no red dot beside the stop-down coupling lever inside the camera body Second possible problem arises if you push in the camera's stop-down lever and before taking a shot, release the stop-down lever and return the lens aperture ring to the "A" mark. If you then try to press the shutter button, you will notice that neither it no the film advance lever will operate.
|
|
|
Error -9923 Appears When Trying to Scan Across a Network on macOS
|
Settings --> Advanced -->
|
|
|
"Error Loading XML" when trying to view the e-Manual
|
2. In [Flash Player Settings Manager], click [ Advanced ] → [Trusted Location Settings..] → [Add..] 3. In [Add Site], click [Add Folder...] → select the location where the e-Manual is stored → click [OK] →[Confirm] →[Close]. Attempt to open the e-Manual again.
|
|
|
Error -21345 or -21355 Appears When Trying to Scan Across a Network on macOS (PIXMA TS / TR)
|
--> Settings --> Advanced --> TCP/IP settings
|
|
|
Support Code 2103 Appears (Printer Can't Detect the Paper Size) - PRO-300
|
When printing by other methods: , Paper-related settings , Advanced paper settings in this order, select the paper type, and then set Detect paper width
|
|
