| Search Results |
 |
Scanning an image with IS Scan - Windows
|
Scanning an Image Install the IS-12 or IS-22 Color Image Scanner Cartridge in the appropriate printer. Make sure Canon IS Scan 2 is set as the Acquire Source and then select the command used for scanning (such as Acquire
|
|
|
Calibrate the Scanner from a Mac - MX922
|
If scanned images have incorrect colors , calibrating the scanner may help resolve the problem.
|
|
|
Send a fax with non-default image resolution or contrast settings - MX922
|
Steps to change the TX image quality settings Photo - Suitable for photographs. Note: When sending a color fax , documents are always scanned in the same resolution (200 x 200 dpi). The image quality (compression rate) is determined by which scan resolution is selected, except that Extra fine and Photo provide the same image quality.
|
|
|
Using the scanner push-buttons (5600F)
|
Using the Scanner Buttons [COLOR] Button Scans color images in A4 or Letter size* at 300 dpi. [BLACK & WHITE] Button
|
|
|
Change the fax settings - MX310
|
TX TERMINAL ID TTI POSITION: Selects the position of the sender information (outside or inside the image area) when sending black & white faxes (Automatically set inside the image area for color faxes ). FAX/TEL NO. MARK:
|
|
|
Change the fax settings (MP530)
|
FAX SETTINGS Prints sender information at the top of each fax you send (The ON/OFF setting may be available depending on the county of purchase). TTI POSITION: Selects the position of the sender information (outside or inside the image area) when sending black & white faxes (Automatically set inside the image area for color faxes ). FAX/TEL NO. MARK: Selects the mark to appear before the fax/telephone number printed on faxes you send.
|
|
|
Use the white calibration sheet - IS-12 Scanner cartridge - BJC-85
|
Using the White Calibration Sheet When cleaning the white calibration sheet, use a soft cloth that is dipped in a weak, neutral detergent solution, and then wipe its wet surface off with a dry, soft cloth. The white level calibration data is stored into memory and used for maintaining the correct color balance of scanned images . When a message appears and prompts you to load the white calibration sheet, click the 'OK' button and perform white level calibration.
|
|
|
ScanGear Preferences (Color Settings Tab) - CanoScan 4200F
|
Preferences Dialog ( Color Settings tab) Select a color correction method from ... ... This option displays colors vividly on computer ... ... the Canon ColorGear color management system. It makes colors consistent between the ... monitor and a color printer. No color correction is performed ... ... enabled when the Color mode ... is set to Color or Color (48 bit ... The Color ... is selected since color correction is automated ... (The Color Source ( Scanner ) Sets the scanner profile. ... Sets the RGB color space profile such ... ... , the preview image is converted to the monitor's RGB color space and displayed ... ... converted to the color space specified in ...
|
|
|
ScanGear Preferences (Color Settings Tab) - CanoScan 3200F
|
Preferences Dialog ( Color Settings tab) Select a color correction method from ... ... This option displays colors vividly on computer ... ... ColorGear / ColorSync color management system. It makes colors consistent between the ... monitor and a color printer. No color correction is performed ... ... enabled when the Color mode ... is set to Color or Color (48 bit ... The Color ... is selected since color correction is automated ... (The Color Source ( Scanner ) Sets the scanner profile. ... Sets the RGB color space profile such ... ... , the preview image is converted to the monitor's RGB color space and displayed ... ... converted to the color space specified in ...
|
|
|
Scanner specifications MX850
|
Scanner Element CIS (Contact Image Sensor) Color Scanning Resolution
|
|
