| Search Results |
 |
Using the IJ Network Tool to Reconfigure the Printer's Network Settings after AP / Router Change (Mac)
|
The IJ Network Tool can be used to reconfigure the network settings of your printer. This can be very helpful after the network has been changed ( new access point / router , different network key / password on the access point , or a different SSID being given to the access point ).
|
|
|
Changing Settings in Wireless LAN Sheet (Windows)
|
|
Disabling the wireless LAN setting on the printer
|
This article applies to the PIXMA iP7220, iP8720, iX6820 , PRO-10, and the PRO-100.
|
|
|
How to Disable or Enable IPv6 on the iP8720 and iX6820
|
The router may assign a new IPv4 address to the printer. If this happens, you may need to print another LAN details page from your printer in order to confirm that IPv6 has been disabled.
|
|
|
Checking the Ink Status with the Ink Lamps - iX6820
|
Checking the Ink Status with the Ink Lamps Ink tank is running low. Prepare a new ink tank. Note
|
|
|
Replacing an Ink Tank (iX6820)
|
Use a new ink tank for replacement. Installing a used ink tank may cause the nozzles to clog. Furthermore, with such an ink tank, the machine will not be able to inform you when to replace the ink tank properly.
|
|
|
Reseat the print head and ink tanks - iP4820 / iP8720 / iX6520 / iX6820
|
How to re-install the print head / ink tanks (at about three second interval): Ink is low. Prepare a new ink tank.
|
|
|
Alarm Lamp Flashes - iX6820
|
If you still experience the error, For additional support options or servicing, please click the link below to either sign into or create a new Canon Account. My Canon Account
|
|
|
Printer Driver Restrictions - iX6820
|
Restrictions on the Printer Driver with a USB cable and print, you must install the latest AirPort firmware.
|
|
|
Perform Bottom Plate Cleaning (Mac OS X) - iX6820
|
Perform Bottom Plate Cleaning Examine the ejected paper. If it is still smeared with ink, perform bottom plate cleaning up to two times. If the last ejected paper is still smeared, use a cotton swab to clean the inside of the printer.
|
|
