Ask a Question

Replacing the Retard Roller (DR-C225/C225W)

Article ID: ART100090 | Date published: 05/11/2015 | Date last updated: 08/14/2015
 

Description

Follow these steps to replace the retard roller.

Solution

Replacing the Retard Roller

1. Open the roller cover.
   

2. Remove the retard roller and then install the new retard roller. When installing the retard roller, align the notch on the roller with the shaft of the main unit.
   

3. Close the roller cover. Make sure that it is completely closed by pressing until you hear a click.
   


Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments