How to Print Nozzle Check

Article ID: ART100156 | Date published: 05/11/2015 | Date last updated: 08/15/2015



Printing the Nozzle Check Pattern

Print the nozzle check pattern to determine whether the ink ejects properly from the print head nozzle.


 If the remaining ink level is low, the nozzle check pattern will not be printed correctly. Replace the FINE cartridge whose ink is low.


You need to prepare: a sheet of A4 or Letter-sized plain paper

  1. Make sure that the power is turned on.

  2. Load a sheet of A4 or Letter-sized plain paper in the rear tray.

  3. Pull out the paper output tray and the output tray extension.

  4. Hold down the ON/RESUME button until the POWER lamp flashes green twice, then release it immediately.

The nozzle check pattern will be printed.

Do not perform any other operations until the printer completes the printing of the nozzle check pattern.

  1. Examine the nozzle check pattern.



    Rate this Article
    Was this article helpful?
    Yes, This document is helpful
    No, This document needs a clearer explanation
    Please provide your comments