Adjusting Exposure Compensation (PowerShot SX710 HS)

Article ID: ART100175 | Date published: 05/11/2015 | Date last updated: 08/14/2015


Adjusting Exposure Compensation (PowerShot SX710 HS)


The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of 2 to +2.
  • The following section explains the setting procedures when the cameras shooting mode has been set to [Program AE] ().

For a list of shooting modes in which exposure compensation cannot be set, please refer to the table at the bottom of the page.

1. Press the <Power> button to turn the camera on.

2. Press the [ ] button.

3. As you watch the screen, turn the [ ] dial to adjust brightness, and then press the [ ] button again when finished.

4. The correction level you specified is now displayed.

Exposure compensation cannot be set in the following shooting modes.
ModelShooting Mode
PowerShot SX710 HS , , , , , , ,



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments