| Article ID: ART100175 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 08/14/2015 |
Description
Adjusting Exposure Compensation (PowerShot SX710 HS)
Solution
| Adjusting Exposure Compensation (PowerShot SX710 HS) ID : 8202398100 _ EN _ 1 |
| Solution | The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of 2 to +2. IMPORTANT - The following section explains the setting procedures when the cameras shooting mode has been set to [Program AE] (
 ).
For a list of shooting modes in which exposure compensation cannot be set, please refer to the table at the bottom of the page. 1. Press the <Power> button to turn the camera on. 2. Press the [  ] button.
 3. As you watch the screen, turn the [  ] dial to adjust brightness, and then press the [ ] button again when finished.
 4. The correction level you specified is now displayed.
Exposure compensation cannot be set in the following shooting modes. | Model | Shooting Mode |
|---|
| PowerShot SX710 HS |  ,  ,  ,  ,  ,  ,  ,  |
|
