Images are blurry or not in focus (PowerShot SX710 HS)
Article ID: ART100182 | | | Date published: 05/11/2015 | | | Date last updated: 08/14/2015 |
Description
Images are blurry or not in focus (PowerShot SX710 HS)
Solution
Images are blurry or not in focus (PowerShot SX710 HS) ID
:
8202410100
_
EN
_
1
|
|||||||||||||
Solution |
When an image is blurry or cannot be brought into focus during shooting, please check the following.
1. Holding the Camera You can prevent camera shake by holding the camera firmly.
2. When the Camera Shake Icon Appears When you press the <Shutter Button> halfway in low light conditions where camera shake is likely, a flashing () will appear.
Press <MENU> button > [Shooting] tab [ ] > [IS Settings], and then select [Continuous] for the [IS Mode].
Move the [ ] switch, press the [ ] button, and then press the [ ], [ ] buttons to choose [On] ().
Press the < FUNC./SET> [ ] button, then select [ ] from the menu and choose the desired [ISO Speed].
Additionally, you should set the [IS Mode] to [Off] when shooting with a tripod.
3. Image is blurred
Half-press the <Shutter Button> (press lightly to focus), and then press it fully (without releasing the <Shutter Button>, press it all the way down).
Press the [ ] button, select the [Shooting] tab (), and then set the [AF-assist Beam] to [On].
Press the <Macro> button () several times to select a suitable [Focusing Range].
- Focus Lock
Change the composition while holding the <Shutter Button> down halfway.
- AF Lock
With the shutter button pressed halfway, press the [ ] button.
4. The AF frame does not appear, and the camera does not focus If you center on the light and dark contrasting area of the subject and push the <Shutter Button> halfway, or repeatedly push the <Shutter Button> halfway, the [AF frame] will appear and the camera will focus.
5. Model information
PowerShot SX710 HS
|
SIMS Doc Id
8202410100