| Article ID: ART100515 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 08/14/2015 |
Description
Setting the flash to fire for each shot (PowerShot SX710 HS)
Solution
| Setting the flash to fire for each shot (PowerShot SX710 HS) ID
:
8202408100
_
EN
_
1
|
| Solution |
When setting [Flash] to [Auto], [Flash] is not activated if the surroundings are light. However, when shooting with the subject backlit, [Flash] is sometimes used not to make the subject dark. This section describes the setting to shoot the shots with constant flash.
IMPORTANT
- The following example shows the procedure when the cameras shooting mode has been set to [Program AE] (
 ).
1. Press the <Power> button to turn the camera on.
Move the <Flash> [  ] switch to raise the flash.
3. Press the <Flash> [  ] button.
3. Press the [  ], [  ] buttons to choose [On] (  ).
4. If the following icon is displayed on the monitor, the setting process is complete.
IMPORTANT
- The setting screen cannot be accessed by pressing the <Flash> [ ] button when the flash is lowered. Move the <Flash> [ ] switch to raise the flash, then configure the setting.
- The <Flash> cannot be set to [On] in the following shooting modes:
[Hybrid Auto] (  ), [Auto] (  ), [Creative Shot] (  ), [Sports] (  ), [Low Light] (  ), [Fireworks] (  ), [Standard] (  ), [iFrame Movies] (  )
|
