Adjusting Exposure Compensation (PowerShot SX610 HS)
| Article ID: ART100549 |
| |
Date published: 05/11/2015 |
| |
Date last updated: 08/14/2015 |
Description
Adjusting Exposure Compensation (PowerShot SX610 HS)
Solution
| Adjusting Exposure Compensation (PowerShot SX610 HS) ID
:
8202484100
_
EN
_
1
|
| Solution |
The standard exposure set by the camera can be adjusted in 1/3-stop increments, in a range of 2 to +2.
IMPORTANT
- In the following example proceure, the camera's shooting mode has been set to [Program AE] (
 ) mode.
For a list of shooting modes in which exposure compensation cannot be set, please refer to the table at the bottom of the page.
1. Press the <Power> button to turn the camera on.
2. Press the [  ] button.
3. Press the [  ], [  ] buttons to choose [Exposure Compensation] (if the settings have not been changed [  ] will be displayed), and then press the [ ] button.
4. As you watch the screen, press the [ ], [ ] buttons to adjust the brightness.
5. Press the [ ] button to display the set exposure compensation amount, and then shoot.
Exposure compensation cannot be set in the following shooting modes.
| Model | Shooting Mode |
|---|
| PowerShot SX610 HS |
,
,
,
,
|
|
