How to update the printer firmware - iP110

Article ID: ART100553 | Date published: 05/11/2015 | Date last updated: 05/10/2019


This article provides information on updating the firmware for the PIXMA iP110.



Firmware update history

1. Printing from Windows 10 Mobile is now available.
1. The new functions of Google Cloud Print have become available as below.
  • Local Discovery:
    You can search for a printer and register it via Google Chrome as long as the printer is connected to the same network.
  • Local Printing:
    You can print from an information device that is connected to the same network as the printer regardless whether the printer is connected to the Internet or not.


2. Supported for the security specification change of Google Cloud Print.


Required environment

For the update, you need to have a PC or PDA such as a smartphone in addition to the printer.
Using that PC or PDA, you will update the printer firmware via the access point or router.
The printer, access point or router, and PC or PDA should be connected as shown below.


(A) Internet
(B) Access point or router
(C) PC or PDA such as a smartphone
(D) Printer


Procedures for updating the printer firmware


  • The printer must be connected to a wireless network with internet access in order to update the firmware.

To update the printer firmware, follow the steps below.

  • DO NOT power off the printer during the update.


(1) Confirm that the printer is turned on.


(2) Confirm that the printer is connected to the Internet.


(3) Load one sheet of A4 size or Letter size plain paper.


(4) Press and hold the Stop button until the Alarm lamp blinks 6 times, then release the button.
Printing of the network setup information starts.
  • This printout is used later in the registration process.


(5) Open the web browser of your PC, smartphone, or other types of PDA. In the address entry box of the browser, enter the text that you see on the printout in the "IPv4 IP Address" line.

For example, with the printout shown above, enter "" in the box.


(6) From the authentication screen, enter the Username and Password.
Username : ADMIN
Password : canon
An administrator password "canon" is already specified for the printer at the time of purchase.
For security reasons, it is recommended to change the password before you use the printer.


(7) The Remote UI starts and the top window is displayed.


(8) Select [ Firmware update ] and [ Install update ].


(9) When " Update succeeded " is displayed, select OK.

Update of the firmware is completed.




Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments