Charging the battery pack for a ZR900 series camcorder

Article ID: ART100957 | Date published: 05/11/2015 | Date last updated: 08/15/2015


Charging the battery pack for a ZR900 series camcorder


Charging the Battery Pack

  1. Turn off the camcorder.

  2. Attach the battery pack to the camcorder. Press the battery pack lightly and slide it up until it clicks.
  3. Connect the power cord to the adapter. Plug the power cord into a power outlet.

  4. Connect the power adapter to the camcorder's DC IN terminal.
    - The CHARGE indicator starts flashing. It glows steadily when charging is complete.
  5. When charging is complete, disconnect the power adapter from the camcorder. Unplug the power cord from the power outlet and disconnect it from the adapter.
  6. Remove the battery pack after use.
    - Press the BATT. RELEASE button to remove the battery.

    • Turn off the camcorder before connecting or disconnecting the power adapter.
    • If the adapter is used close to a TV, it may cause picture interference. Move the adapter away from the TV or the antenna cable.
    • Do not connect any products that are not expressly recommended to the camcorder's DC IN terminal or to the power adapter.
    • You may hear some noise from the power adapter during use. This is not a malfunction.
    • Do not disconnect and reconnect the power cord while charging a battery pack. Charging may stop. The battery pack may not be charged correctly even if the CHARGE indicator glows steady. The battery pack may also not be charged correctly when a power outage occurs during charging. Remove the battery pack and attach it back to the camcorder.
    • When the power adapter or battery pack is defective, the CHARGE indicator flashes rapidly (at about 2 flashes/second) and charging stops.
    • The CHARGE indicator informs you about the charge status.
      0-50%: Flashes once every second
      More than 50%: Flashes twice every second
      100%: Glows steadily



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments