Follow this procedure to scan a document to your computer. Make sure that the scanner driver is installed. To check if the driver is installed, see .
1. Set documents.
Place the first page on the platen glass if you are not using the ADF.
For information on the type and size of document, see .
2. Enter the Scan Mode.
Press [SCAN].
The SCAN indicator lights up and the machine enters the scan standby mode.
3. Set the Scan Function.
Start MF Toolbox, then select the scan format. The mark is displayed above the selected button.
4. Start Scanning.
Press [Start].
note:
If you want to cancel scanning:
Press [Stop] on the operation panel, then click [OK] on the computer screen.
