Procedure for replaying images PowerShot A580

Article ID: ART102091 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Procedure for replaying images PowerShot A580

Solution

Replaying

Displaying Images Individually

1. Move the / (Playback / Shooting) switch to the (Playback) mode and press the power button. The last recorded image appears (single image replay).

2. Move between images using the or button.

Use the button to move to the previous image and the button to move to the next. Holding the or button moves more rapidly between images, but the images will not appear as clearly.

  • Press the <DISP.> button to show the data for the displayed image.
  • Press the button to quickly delete the displayed image.

Magnifying Images. Images can be magnified up to approximately 10 times.

1. 1. Press the / (Playback / Shooting) switch to the (Playback) mode and press the power button.

2. Press the zoom lever toward . Each press of the zoom lever will increase the magnification level.

  • will display and a magnified portion of the image will display.
  • Images can be magnified up to a factor of approximately 10x.

  • You can move around the magnified image by pressing the <FUNC./SET> button and using the , , or button.
  • If you press the <FUNC./SET> button once more, the camera switches to image advance mode and will display. You can then use the or button to advance to the next or previous image at the same level of magnification. The image advance mode cancels when the <FUNC./SET> button is pressed again.

Canceling the Magnified Display

1. Press the zoom lever toward to zoom out of the image. To quickley exit the magnified view press the <MENU> button.

Movie frames and index replayed images cannot be magnified.

You can magnify an image while it is displayed on the LCD monitor in Shooting mode immediately after the image is shot.

Viewing Images in Sets of Nine (Index Replay)

Up to nine images can be viewed at once in index replay.

1. Press the / (Playback / Shooting) button.

2. Press the zoom lever toward .

Nine images appear at once (index replay).

3. Change the image selection using the , , or button.

4. To return to Single Image Playback, press the zoom lever toward .

Press the <DISP.> button to show the data for the displayed image.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments