Procedure for setting Date Stamp Mode PowerShot SD770 IS.
Article ID: ART102298 | Date published: 05/11/2015 | Date last updated: 11/16/2015
 

Description

Procedure for setting Date Stamp Mode PowerShot SD770 IS.

Solution

Date Stamp Mode

You can shoot images with settings appropriate for embedding the date and for use in postcard size printing by choosing to shoot in the [Date Stamp] mode.

* When printing standard image data to a postcard sized print, sometimes the top, bottom and sides may not get printed. By shooting images in the Date Stamp mode, you can check the printing area (vertical / horizontal ratio of 3:2) beforehand. In addition, the resolution locks to M1 (1600 x 1200) and the compression locks to the (Fine) setting, rendering smaller file sizes.

  1. With the camera in the shooting mode, press the <FUNC.> button.
     
  2. Select L* using or .
  3. Select (Postcard) using or .
    * The current setting is displayed.



    You can shoot the image right after selecting settings by pressing the shutter button. The menu displays again after the shot, allowing you to change the settings easily.
  4. Press the <FUNC./SET> button.
  5. Shoot the image.
  • When you press the shutter button halfway, the area that will not get printed grays out.
  • Shooting procedures are the same as for the mode.
Selecting cancels the [On] setting of the digital zoom.

If the date and time are not set the [Date Stamp] feature will not be selectable until the date and time are set.

 

SIMS Doc Id

0