Two Sided Copying (MF7400 Series)
1 to 2-Sided
This feature enables you to make two-sided copies from one-sided originals.
note:
- The 1 
2-Sided mode cannot be used with the Two-page Separation or Image Combination mode.
- If there are an odd number of originals, the back side of the last copy is left blank.
- If the 1 2-Sided mode is used with the Different Size Originals mode, the copies of different size originals will be printed as one-sided copies on paper of their respective sizes. If you want to make two-sided copies with different size originals, you must select the paper size beforehand.
1 Press 
(COPY).
2 Place your originals.
3
4
To set the orientation of the two-sided copies:
1
2
1 Select the type of two-sided orientation. Details of each item are shown below.
[Book Type]: The front and back sides of the copy will have the same topbottom orientation.
[Calendar Type]: The front and back sides of the copy will have opposite top-bottom orientations.
2 Press [Done].
5
6 Press 
(Start).
If the original is placed on the platen glass, follow the instructions that appear on the touch panel display. Press (Start) once for each original. When scanning is complete, press [Done].
note:
- To cancel this setting, press [2-Sided], then press [Cancel].
- To cancel all settings and return the machine to the Standard mode, press 
(Reset).
2 to 2-Sided
This feature enables you to make two-sided copies from two-sided originals. If a two-sided original is placed in the feeder, it is automatically turned over so that sides of the original are copied on the front and back sides of a copy sheet.
note:
The 2 2-Sided mode cannot be used with the Two-page Separation or Image Combination mode.
1 Press (COPY).
2 Place your originals.
3
4
To set the orientation of the originals and the copies:
1
2
1 Select the type of two-sided orientation for the originals and the copies. Details of each item are shown below. Original
[Book Type]: The front and back sides of the original have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the original have opposite topbottom orientations.
Copy
[Book Type]: The front and back sides of the copy will have the same topbottom orientation.
[Calendar Type]: The front and back sides of the copy will have opposite top-bottom orientations.
2 Press [Done].
5
6 Press (Start).
If the original is placed on the platen glass, follow the instructions that appear on the touch panel display. Press (Start) once for each original. When scanning is complete, press [Done].
note:
- To cancel this setting, press [2-Sided], then press [Cancel].
- To cancel all settings and return the machine to the Standard mode, press (Reset).
2 to 1-Sided
This feature automatically turns over two-sided originals placed in the feeder to make onesided copies on different sheets of paper.
note:
- The 2 
1-Sided mode cannot be used with the 2-page Separation or Image Combination mode.
- Make sure to place originals, such as LTRR, horizontally. If these originals are placed vertically, the back side of the copy is printed upside down.
1 Press (COPY).
2 Place your originals into the feeder.
3
4
To set the orientation of the originals :
1
2
1 Select the orientation of the originals. Details of each item are shown below.
[Book Type]: The front and back sides of the original have the same top-bottom orientation.
[Calendar Type]: The front and back sides of the original have opposite top-bottom orientations.
2 Press [Done].
5
6 Press (Start).
note:
To cancel this setting, press [2-Sided], then press [Cancel].
- To cancel all settings and return the machine to the Standard mode, press (Reset).
Book to 2-Sided
This feature enables you to make two-sided copies from facing pages, or from the front and back sides of a page in bound originals, such as books and magazines.
note:
- The Book 2-Sided mode cannot be used with the 2-page Separation, Image Combination, Binding Erase, or Different Size Originals mode.
- Only LTR paper can be used for Book 2-Sided copying.
- If you select [Front/Back Two-sided], the front side of the first two-sided page and the back side of the last two-sided page are left blank.
- Place your original on the platen glass. The Book 2-Sided mode cannot be used when the original is placed in the feeder.
1 Press (COPY).
2 Place your original on the platen glass.
3
To make copies in the correct page order, begin copying from the first open page of the book or bound original.
Place your original face down, making sure that its top edge is aligned with the back edge of the platen glass (by the arrow in the top left corner).
4
1 Press [Book > 2-Sided].
2 Press [Next].
5
1 Select the desired type of two-sided layout. Details of each item are shown below.
[Left/Right 2-sided] : The facing pages of a book or bound original are copied on the front and back sides of a single sheet of paper.
[Front/Back 2-sided]: The front and back sides of the left page, or the front and back sides of the right page, are copied on the front and back sides of a single sheet of paper.
2 Press [OK].
6 Press (Start).
To copy the next two facing pages, turn the page of the original. Place your original on the platen glass, then press (Start).
7
note:
- To cancel this setting, press [2-Sided], then press [Cancel].
- To cancel all settings and return the machine to the Standard mode, press (Reset).
