How to adjust printhead - iPF605
Article ID: ART102880 | | | Date published: 05/11/2015 | | | Date last updated: 08/15/2015 |
Description
How to perform printhead adjustment - iPF605
Solution
Adjust the Printhead alignment (iPF605) |
<Adjusting the Printhead Alignment Automatically> |
1. When using sheets, have an unused sheet A4/Letter-sized or larger ready when Standard Adj. is selected or 5 when Advanced Adj. is selected. When using a roll, load a roll 10 inches (254 mm) or wider. |
2. Press the Menu button to display MAIN MENU . |
![]() |
3. Press ![]() ![]() ![]() |
4. Press ![]() ![]() ![]() |
5. Press ![]() ![]() ![]() |
6. Press ![]() ![]() |
A test pattern is printed for printhead adjustment. |
After reading the pattern, the printer automatically adjusts the Printhead alignment. |
<Adjusting the Printhead Alignment Manually> |
<Note> |
- If Manual Head Adj is not displayed in the menu, choose Advanced Adj. in Auto Head Adj. Manual Head Adj is displayed after you try Auto Head Adj. once. |
1. When using sheets, have an unused sheet A4/Letter-sized or larger ready. When using a roll, load a roll 10 inches (254 mm) or wider. |
2. Press the Menu button to display MAIN MENU . |
![]() |
3. Press ![]() ![]() ![]() |
4. Press ![]() ![]() ![]() |
5. Press ![]() ![]() |
A test pattern is printed for printhead adjustment. |
6. Press ![]() ![]() ![]() |
7. Press ![]() ![]() ![]() |
8. Examine test pattern D-1 for printhead adjustment. After you determine the pattern with straight lines, press or to choose the pattern number, and then press the OK button. |
![]() |
9. Repeat steps 7 and 8 to specify the adjustment value for D-2 to D-5 and D-7 to D-11 . |
10. Press the ![]() |
11. Press ![]() ![]() ![]() |
12. Press ![]() ![]() |
<Operation procedure with the printer driver> |
<Windows> |
1. Select the [Utility] sheet. |
2. Click the [Maintenance] button. imagePROGRAF StatusMonitor starts up, and the [Maintenance] sheet is displayed. |
3. Click the [Printhead Adjustment] button. The confirmation screen is displayed. |
4. Load media, then click the [OK] button. The printhead adjustment pattern is printed. |
<MacOSX> |
1. Display the Utility panel. |
2. Click the [Set...] button of [Perform printer maintenance.]. |
3. Click the [Printhead Adjustment] button. The confirmation screen is displayed. |
4. Load media, then click the [OK] button. The printhead adjustment pattern is printed. |
SIMS Doc Id
0