How to use household power source to power an EOS 10D

Article ID: ART103071 | Date published: 05/11/2015 | Date last updated: 08/15/2015


How to use household power source to power an EOS 10D


With AC Adapter Kit ACK-E2 (optional), you can connect the camera to a household power outlet. Then you do not have to worry about exhausting the battery while using the camera.

Place the cord in the groove.
  • Carefully insert the cord into the groove without damaging it.

Insert the DC coupler into the camera.

  • Open the cover and lower the covering on the cord hole.
  • Insert the DC coupler and fit the cord into the cord hole.
  • Check that the cord is placed tightly in the cord hole, and slide the DC coupler into the compartment until it locks into place.
  • Push down the cover until it clicks.

Connect the power cord.

  • Connect the power cord to the AC adapter.
  • Plug the cord into a power outlet.
  • When you are finished, remove the plug from the power outlet.
  • Do not connect or disconnect the power cord while the camera's <> switch is set to <ON> .
  • Do not use the DC coupler with any camera other than the EOS 10D, D60, and D30.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments