Procedure for setting ISO PowerShot SD880 IS and SD990 IS.

Article ID: ART103368 | Date published: 05/11/2015 | Date last updated: 08/15/2015


Procedure for setting ISO PowerShot SD880 IS and SD990 IS.


Changing the ISO Speed

Change the ISO speed when shooting in dark places or when you want to shoot with a faster shutter speed. You can choose from the following speeds: ISO 80, 100, 200, 400, 800 and 1600. This function is only available in P and (Digital Macro) modes when selecting options other than AUTO ISO / AUTO HI ISO.

When in the (Auto) camera shooting mode only and can be selected. In the <SCN> (Special Scene Mode) ISO3200 can be set as a shooting mode.

1. Press the <ISO> () button.

2. Each press of the or (ISO) button toggles thru the settings (ISO Auto, HI, 80, 100, 200, 400, 800 and 1600.)

  • Higher ISO speeds increase the image noise. To take clean images, use as low an ISO speed as possible.
  • Although the (Auto) sets the optimal ISO speed according to the light level when shooting. Since the ISO speed setting will automatically be raised in dark places, the camera will select a faster shutter speed and reduce the chances of camera shake.
  • Selecting the (High ISO Auto) sets the sensitivity to a higher value than the setting. This sets the shutter speed faster, reducing the potential for camera shake or blurry subjects compared with the setting. Noise in the recorded image may be higher than for the setting since it enables the camera to choose a higher ISO range.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments