The standard of the video signal output from the
HD/SD SDI (
only),
HD/SD COMPONENT OUT and
HDV/DV terminals depends on the standard used for recording (or the standard of the recording on the tape being played back) and on various menu settings. Video output from the
VIEWFINDER/COMPONENT OUT,
A/V1, or
VIDEO 2 terminal will always be in
480/60i standard. Standard of Video Output while Recording
While recording in high definition, video output from the HD/SD SDI terminal will be an uncompressed HD, YPbPr signal. You can down-convert the video output with the respective menu settings.
|
Recording standard and frame rate
|
HD/SD SDI terminal
|
HD/SD COMPONENT OUT terminal
|
HDV/DV terminal
|
|
Unchanged
|
Down-converted *1,*4,*5
|
Unchanged
|
Down-converted *2,*4
|
|
HD 60i
|
1080/60i
|
480/60i
|
1080/60i
|
480/60i
|
1080/60i
|
|
HD 30F
|
1080/60i
|
480/60i *7
|
1080/60i
|
480/60i *7
|
1080/30p
|
|
HD 24F
|
1080/60i
|
480/60i *8,*9
|
1080/60i
|
480/60i *8
|
1080/24p
|
|
SD (60i,30F *7,24F *10)
|
480/60i
|
480/60i
|
480/60i
|
Standard of Video Output during Playback
When playing back a tape recorded in HDV standard, video output from the HD/SD SDI terminal will be a signal modified from the HDV video. You can down-convert the video output with the respective menu settings.
|
Standard of the tape
|
[LETTERBOX] setting
|
HD/SD SDI terminal
|
HD/SD COMPONENT OUT terminal
|
HDV/DV terminal
|
|
Unchanged
|
Down-converted *1,*4
|
Unchanged
|
Down-converted *2,*4
|
Unchanged
|
Down-converted *3,*6
|
|
HDV 1080/60i
|
[OFF]
|
1080/60i
|
480/60i
|
1080/60i
|
480/60i
|
1080/60i
|
480/60i
|
|
[ON]
|
480/60i
|
480/60i
|
|
HDV 1080/30p
|
[OFF]
|
1080/60i *7
|
480/60i
|
1080/60i *7
|
480/60i
|
1080/30p
|
480/60i
|
|
[ON]
|
480/60i *7
|
480/60i *7
|
|
HDV 1080/24p
|
[OFF]
|
1080/60i *8,*9
|
480/60i
|
1080/60i *8
|
480/60i
|
1080/24p
|
480/60i
|
|
[ON]
|
480/60i *8
|
480/60i *8
|
|
DV 480/60i
|
[OFF]/[ON]
|
480/60i
|
480/60i
|
480/60i
|
*1: [SIGNAL SETUP] > [SDI SPEC.] set to [SD LOCKED].
*2: [SIGNAL SETUP] > [COMP.OUT] set to [480i].
*3: [SIGNAL SETUP] > [HD DOWN-CONV] set to [ON].
*4: 16:9 picture is horizontally squeezed to a 4:3 aspect ratio.
*5: On-screen displays will not be embedded in the video output even if [SIGNAL SETUP] > [SDI OUTPUT] is set to [ON(OSD)].
*6: On-screen displays will not be embedded in the video output even if [DISPLAY SETUP/ 
] > [TV SCREEN] is set to [ON].
*7: Converted to 60i.
*8: Converted to 60i using the 2:3 pulldown method.
*9: When a time code signal is output from the TIME CODE or HD/SD SDI terminal, the user bit for this signal can be set to 2:3 pulldown data.
*10: Converted to 60i using the method selected in [CAMERA SETUP] > [24F MODE SEL].
