Ask a Question

Remove the Cassette (blinking of slash cassette mark) message in LCD explained for the XH A1S and XH G1S

Article ID: ART103770 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Remove the Cassette (blinking of slash cassette mark) message in LCD explained for the XH A1S and XH G1S

Solution

Remove the cassette mark
  • If the slash cassette mark is blinking, No cassette.

Load a cassette correctly.

  • If the slash cassette mark is blinking and the remaining time on the tape is displayed(*), The cassette is protected.
  • Check whether the position of the protect switch is set to REC.

*On the viewfinder screen, " THE TAPE IS SET FOR ERASURE PREVENTION " lights up for 4 seconds and then blinks red.

If these problems persist even after having attempted the solutions described above, please contact the nearest Canon service center.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments