How to connect the VB-C10 / VB-C10R to a Network

Article ID: ART103861 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

How to connect the VB-C10 / VB-C10R to a Network

Solution

This section describes some typical installation modes for the VB-C10/VB-C10R.

Be sure to assign a fixed IP address to the VB-C10/VB-C10R.

Sample LAN Environment Configuration

This example shows the VB-C10/VB-C10R connected to a LAN by Ethernet. In this configuration, videos can be seen by viewers in the same Ethernet segment as the VB-C10/VB-C10R and by viewers with access to that segment.

Sample Configuration In an ISP Environment

This example shows an environment in which the VB-C10/VB-C10R is connected to an ISP (Internet service provider). In this configuration, videos can be seen by viewers capable of accessing the ISP.

Bidirectional communication is required between the VB-C10/VB-C10R and the ISP, and a fixed IP address must be set for the VB-C10/VB-C10R.

SIMS Doc Id

0

Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
 
Please provide your comments