Calibrating the scanner (9950F)
Article ID: ART104510 | Date published: 05/11/2015 | Date last updated: 08/15/2015
 

Description

Calibrating the scanner (9950F)

Solution

Calibrating the CanoScan 9950F

Calibrate the scanner if the colors in the preview image vary significantly from those in the original item or colors appear in areas that should be white. Clicking the 'Execute' button starts the calibration process, which will allow scanned images to be adjusted to the proper coloration.

To calibrate the scanner:

  1. Open ScanGear from the desired application (ex.- Toolbox, PhotoStudio, etc.).
  2. If not already in Advanced Mode, click on the 'Advanced Mode' tab.

  3. The calibration option is located in the Image Settings section.


    Note: In order for the Calibration Settings to be fully visible, it may be necessary to click the double arrow next to it. Additionally, as the Image Settings section is scrollable, you may need to use the scroll bar to scroll down.
  4. Click the 'Execute' button next to Calibration:.

SIMS Doc Id

0