How to use the NC Viewer as a Video Switcher for the VB-C300

Article ID: ART104621 | Date published: 05/11/2015 | Date last updated: 08/15/2015


How to use the NC Viewer as a Video Switcher for the VB-C300


Using Viewer Switcher

If you are using other cameras (e.g., VB-C50i) with the VB-C300, you can switch the Viewer to use the cameras.

1. Double-click the Viewer Switcher icon on the


Alternatively, you can select "Viewer Switcher" from the Start


2. The Viewer Switcher dialog opens.

Select a camera from the camera list. The camera list contains the camera list of the NC Viewer and the camera site list of the Viewer for PC. The viewer corresponding to the selected camera automatically starts.


  • The camera must be registered in the camera list (for the VB-C300) or camera site list (for other cameras) corresponding to the viewer to be used
  • Switch to the Viewer for PC when you are using a camera other than the VB-C300. Use the Viewer for PC Ver. 3.6 or later.
  • When the NC Viewer launches, the Password dialog may open. Enter the correct user name and password to connect to the camera.



Rate this Article
Was this article helpful?
Yes, This document is helpful
No, This document needs a clearer explanation
Please provide your comments