When the backup battery's power level runs low, the message " " appears on the camera's LCD panel. If this happens, you will need to purchase a replacement CR2025 battery and replace the backup battery in your camera as follows.
If you replace the backup battery while the camera is connected to a battery pack with power remaining or to a DC coupler, the date, time, and other menu functions will retain their settings.
|
Set the Main Switch to OFF
Open the backup battery chamber cover by turning it 45 degrees counterclockwise, as shown by the arrow in the diagram.
- Be careful not to rotate the cover more than 45 degrees.
Remove the old backup battery.
- Turn the camera so the backup battery chamber faces down, and press the edge of the battery to remove it.
Insert a fresh backup battery.
- Make sure the battery's positive (+) side faces up.
Close the cover by turning it clockwise, as shown by the arrow in the diagram.
- If the date and time now displayed in the LCD panel are incorrect, you will need to set them.
|