WARNING:

Install the camera securely.

• When installing the VB-C10R on the ceiling, contact your Canon dealer.
• When installing the VB-C10R on the ceiling, check that the ceiling is strong enough to bear the weight of the VB-C10R including the mounting plate. Installation in a weak location could result in the VB-C10R falling and causing serious injury.
• At least once a year, check for looseness in the camera installation mount. (If the optional wide-angle converter is used, check the converter mount also.

The permissible camera installation angles are +/-20° from the horizontal. (+/-15° when the optional wide-angle converter is used for the VB-C10.)

The MAC address required when making network settings is shown on the bottom of the VB-C10/VB-C10R. Please make a note of it before installing this unit

Using a Tripod (VB-C10)

The screw for mounting a tripod is on the bottom of the VB-C10 toward the front.

• Do not over tighten the mounting screw. If excessive force is used to tighten the mounting screw, camera head movement may be impeded, or other malfunctions may result.
• Always use a tripod mounting screw that is less than 6.0 mm (1/4 in.) in length. The use of screws 6.0 mm (1/4 in.) long or longer could damage the camera. Also, the tripod seat used should be at least 30 mm (1 3/16 in.) in diameter.